RSVPTE4

Package: inet.examples.mpls.testte_failure2

RSVPTE4

network

Example network to demonstrate Rsvp-TE.

See the README file in the model directory for scenario description.

Ipv4NetworkConfigurator RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter StandardHost StandardHost StandardHost StandardHost StandardHost ScenarioManager

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

add direct routes (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
LSR1.status.initialStatus string "UP"

TODO @signal, @statistic
LSR1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR1.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR1.ted.routingTableModule string
LSR1.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR1.linkStateRouting.routingTableModule string
LSR1.linkStateRouting.tedModule string
LSR1.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR1.rsvp.routingTableModule string
LSR1.rsvp.libTableModule string
LSR1.rsvp.tedModule string
LSR1.rsvp.traffic xml xml("")

specifies paths to set up
LSR1.rsvp.helloInterval double
LSR1.rsvp.helloTimeout double
LSR1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.tn.forwardServiceRegistration bool true
LSR1.tn.forwardProtocolRegistration bool true
LSR1.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR1.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR1.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR1.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR1.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR1.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR1.ipv4.routingTable.routingFile string ""

routing table file name
LSR1.ipv4.natTable.networkProtocolModule string "^.ip"
LSR1.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR1.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ipv4.up.forwardServiceRegistration bool true
LSR1.ipv4.up.forwardProtocolRegistration bool true
LSR1.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR1.ipv4.icmp.routingTableModule string
LSR1.ipv4.icmp.crcMode string "declared"
LSR1.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR1.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ipv4.mp.forwardServiceRegistration bool true
LSR1.ipv4.mp.forwardProtocolRegistration bool true
LSR1.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ipv4.lp.forwardServiceRegistration bool true
LSR1.ipv4.lp.forwardProtocolRegistration bool true
LSR1.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.nm.forwardServiceRegistration bool true
LSR1.nm.forwardProtocolRegistration bool true
LSR1.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR1.mpls.libTableModule string
LSR1.libTable.config xml xml("")

table contents to be loaded on startup
LSR1.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ml.forwardServiceRegistration bool true
LSR1.ml.forwardProtocolRegistration bool true
LSR2.status.initialStatus string "UP"

TODO @signal, @statistic
LSR2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR2.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR2.ted.routingTableModule string
LSR2.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR2.linkStateRouting.routingTableModule string
LSR2.linkStateRouting.tedModule string
LSR2.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR2.rsvp.routingTableModule string
LSR2.rsvp.libTableModule string
LSR2.rsvp.tedModule string
LSR2.rsvp.traffic xml xml("")

specifies paths to set up
LSR2.rsvp.helloInterval double
LSR2.rsvp.helloTimeout double
LSR2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.tn.forwardServiceRegistration bool true
LSR2.tn.forwardProtocolRegistration bool true
LSR2.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR2.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR2.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR2.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR2.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR2.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR2.ipv4.routingTable.routingFile string ""

routing table file name
LSR2.ipv4.natTable.networkProtocolModule string "^.ip"
LSR2.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR2.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ipv4.up.forwardServiceRegistration bool true
LSR2.ipv4.up.forwardProtocolRegistration bool true
LSR2.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR2.ipv4.icmp.routingTableModule string
LSR2.ipv4.icmp.crcMode string "declared"
LSR2.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR2.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ipv4.mp.forwardServiceRegistration bool true
LSR2.ipv4.mp.forwardProtocolRegistration bool true
LSR2.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ipv4.lp.forwardServiceRegistration bool true
LSR2.ipv4.lp.forwardProtocolRegistration bool true
LSR2.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.nm.forwardServiceRegistration bool true
LSR2.nm.forwardProtocolRegistration bool true
LSR2.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR2.mpls.libTableModule string
LSR2.libTable.config xml xml("")

table contents to be loaded on startup
LSR2.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ml.forwardServiceRegistration bool true
LSR2.ml.forwardProtocolRegistration bool true
LSR3.status.initialStatus string "UP"

TODO @signal, @statistic
LSR3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR3.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR3.ted.routingTableModule string
LSR3.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR3.linkStateRouting.routingTableModule string
LSR3.linkStateRouting.tedModule string
LSR3.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR3.rsvp.routingTableModule string
LSR3.rsvp.libTableModule string
LSR3.rsvp.tedModule string
LSR3.rsvp.traffic xml xml("")

specifies paths to set up
LSR3.rsvp.helloInterval double
LSR3.rsvp.helloTimeout double
LSR3.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.tn.forwardServiceRegistration bool true
LSR3.tn.forwardProtocolRegistration bool true
LSR3.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR3.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR3.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR3.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR3.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR3.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR3.ipv4.routingTable.routingFile string ""

routing table file name
LSR3.ipv4.natTable.networkProtocolModule string "^.ip"
LSR3.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR3.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ipv4.up.forwardServiceRegistration bool true
LSR3.ipv4.up.forwardProtocolRegistration bool true
LSR3.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR3.ipv4.icmp.routingTableModule string
LSR3.ipv4.icmp.crcMode string "declared"
LSR3.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR3.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ipv4.mp.forwardServiceRegistration bool true
LSR3.ipv4.mp.forwardProtocolRegistration bool true
LSR3.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ipv4.lp.forwardServiceRegistration bool true
LSR3.ipv4.lp.forwardProtocolRegistration bool true
LSR3.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.nm.forwardServiceRegistration bool true
LSR3.nm.forwardProtocolRegistration bool true
LSR3.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR3.mpls.libTableModule string
LSR3.libTable.config xml xml("")

table contents to be loaded on startup
LSR3.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ml.forwardServiceRegistration bool true
LSR3.ml.forwardProtocolRegistration bool true
LSR4.status.initialStatus string "UP"

TODO @signal, @statistic
LSR4.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR4.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR4.ted.routingTableModule string
LSR4.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR4.linkStateRouting.routingTableModule string
LSR4.linkStateRouting.tedModule string
LSR4.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR4.rsvp.routingTableModule string
LSR4.rsvp.libTableModule string
LSR4.rsvp.tedModule string
LSR4.rsvp.traffic xml xml("")

specifies paths to set up
LSR4.rsvp.helloInterval double
LSR4.rsvp.helloTimeout double
LSR4.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.tn.forwardServiceRegistration bool true
LSR4.tn.forwardProtocolRegistration bool true
LSR4.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR4.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR4.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR4.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR4.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR4.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR4.ipv4.routingTable.routingFile string ""

routing table file name
LSR4.ipv4.natTable.networkProtocolModule string "^.ip"
LSR4.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR4.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ipv4.up.forwardServiceRegistration bool true
LSR4.ipv4.up.forwardProtocolRegistration bool true
LSR4.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR4.ipv4.icmp.routingTableModule string
LSR4.ipv4.icmp.crcMode string "declared"
LSR4.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR4.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ipv4.mp.forwardServiceRegistration bool true
LSR4.ipv4.mp.forwardProtocolRegistration bool true
LSR4.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ipv4.lp.forwardServiceRegistration bool true
LSR4.ipv4.lp.forwardProtocolRegistration bool true
LSR4.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.nm.forwardServiceRegistration bool true
LSR4.nm.forwardProtocolRegistration bool true
LSR4.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR4.mpls.libTableModule string
LSR4.libTable.config xml xml("")

table contents to be loaded on startup
LSR4.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ml.forwardServiceRegistration bool true
LSR4.ml.forwardProtocolRegistration bool true
LSR5.status.initialStatus string "UP"

TODO @signal, @statistic
LSR5.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR5.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR5.ted.routingTableModule string
LSR5.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR5.linkStateRouting.routingTableModule string
LSR5.linkStateRouting.tedModule string
LSR5.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR5.rsvp.routingTableModule string
LSR5.rsvp.libTableModule string
LSR5.rsvp.tedModule string
LSR5.rsvp.traffic xml xml("")

specifies paths to set up
LSR5.rsvp.helloInterval double
LSR5.rsvp.helloTimeout double
LSR5.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.tn.forwardServiceRegistration bool true
LSR5.tn.forwardProtocolRegistration bool true
LSR5.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR5.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR5.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR5.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR5.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR5.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR5.ipv4.routingTable.routingFile string ""

routing table file name
LSR5.ipv4.natTable.networkProtocolModule string "^.ip"
LSR5.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR5.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ipv4.up.forwardServiceRegistration bool true
LSR5.ipv4.up.forwardProtocolRegistration bool true
LSR5.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR5.ipv4.icmp.routingTableModule string
LSR5.ipv4.icmp.crcMode string "declared"
LSR5.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR5.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ipv4.mp.forwardServiceRegistration bool true
LSR5.ipv4.mp.forwardProtocolRegistration bool true
LSR5.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ipv4.lp.forwardServiceRegistration bool true
LSR5.ipv4.lp.forwardProtocolRegistration bool true
LSR5.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.nm.forwardServiceRegistration bool true
LSR5.nm.forwardProtocolRegistration bool true
LSR5.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR5.mpls.libTableModule string
LSR5.libTable.config xml xml("")

table contents to be loaded on startup
LSR5.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ml.forwardServiceRegistration bool true
LSR5.ml.forwardProtocolRegistration bool true
LSR6.status.initialStatus string "UP"

TODO @signal, @statistic
LSR6.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR6.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR6.ted.routingTableModule string
LSR6.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR6.linkStateRouting.routingTableModule string
LSR6.linkStateRouting.tedModule string
LSR6.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR6.rsvp.routingTableModule string
LSR6.rsvp.libTableModule string
LSR6.rsvp.tedModule string
LSR6.rsvp.traffic xml xml("")

specifies paths to set up
LSR6.rsvp.helloInterval double
LSR6.rsvp.helloTimeout double
LSR6.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.tn.forwardServiceRegistration bool true
LSR6.tn.forwardProtocolRegistration bool true
LSR6.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR6.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR6.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR6.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR6.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR6.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR6.ipv4.routingTable.routingFile string ""

routing table file name
LSR6.ipv4.natTable.networkProtocolModule string "^.ip"
LSR6.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR6.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ipv4.up.forwardServiceRegistration bool true
LSR6.ipv4.up.forwardProtocolRegistration bool true
LSR6.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR6.ipv4.icmp.routingTableModule string
LSR6.ipv4.icmp.crcMode string "declared"
LSR6.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR6.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ipv4.mp.forwardServiceRegistration bool true
LSR6.ipv4.mp.forwardProtocolRegistration bool true
LSR6.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ipv4.lp.forwardServiceRegistration bool true
LSR6.ipv4.lp.forwardProtocolRegistration bool true
LSR6.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.nm.forwardServiceRegistration bool true
LSR6.nm.forwardProtocolRegistration bool true
LSR6.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR6.mpls.libTableModule string
LSR6.libTable.config xml xml("")

table contents to be loaded on startup
LSR6.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ml.forwardServiceRegistration bool true
LSR6.ml.forwardProtocolRegistration bool true
LSR7.status.initialStatus string "UP"

TODO @signal, @statistic
LSR7.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR7.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR7.ted.routingTableModule string
LSR7.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR7.linkStateRouting.routingTableModule string
LSR7.linkStateRouting.tedModule string
LSR7.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR7.rsvp.routingTableModule string
LSR7.rsvp.libTableModule string
LSR7.rsvp.tedModule string
LSR7.rsvp.traffic xml xml("")

specifies paths to set up
LSR7.rsvp.helloInterval double
LSR7.rsvp.helloTimeout double
LSR7.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.tn.forwardServiceRegistration bool true
LSR7.tn.forwardProtocolRegistration bool true
LSR7.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR7.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR7.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR7.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR7.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR7.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR7.ipv4.routingTable.routingFile string ""

routing table file name
LSR7.ipv4.natTable.networkProtocolModule string "^.ip"
LSR7.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR7.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ipv4.up.forwardServiceRegistration bool true
LSR7.ipv4.up.forwardProtocolRegistration bool true
LSR7.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR7.ipv4.icmp.routingTableModule string
LSR7.ipv4.icmp.crcMode string "declared"
LSR7.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR7.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ipv4.mp.forwardServiceRegistration bool true
LSR7.ipv4.mp.forwardProtocolRegistration bool true
LSR7.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ipv4.lp.forwardServiceRegistration bool true
LSR7.ipv4.lp.forwardProtocolRegistration bool true
LSR7.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.nm.forwardServiceRegistration bool true
LSR7.nm.forwardProtocolRegistration bool true
LSR7.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR7.mpls.libTableModule string
LSR7.libTable.config xml xml("")

table contents to be loaded on startup
LSR7.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ml.forwardServiceRegistration bool true
LSR7.ml.forwardProtocolRegistration bool true
host1.status.initialStatus string "UP"

TODO @signal, @statistic
host1.pcapRecorder.verbose bool true

whether to log packets on the module output
host1.pcapRecorder.pcapFile string ""

the PCAP file to be written
host1.pcapRecorder.fileFormat string "pcapng"
host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
host1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
host1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.cb.forwardServiceRegistration bool true
host1.cb.forwardProtocolRegistration bool true
host1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.bl.forwardServiceRegistration bool true
host1.bl.forwardProtocolRegistration bool true
host1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.li.forwardServiceRegistration bool true
host1.li.forwardProtocolRegistration bool true
host1.eth.bitrate double
host1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.nl.forwardServiceRegistration bool true
host1.nl.forwardProtocolRegistration bool true
host1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.tn.forwardServiceRegistration bool true
host1.tn.forwardProtocolRegistration bool true
host1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.at.forwardServiceRegistration bool true
host1.at.forwardProtocolRegistration bool true
host2.status.initialStatus string "UP"

TODO @signal, @statistic
host2.pcapRecorder.verbose bool true

whether to log packets on the module output
host2.pcapRecorder.pcapFile string ""

the PCAP file to be written
host2.pcapRecorder.fileFormat string "pcapng"
host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
host2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
host2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.cb.forwardServiceRegistration bool true
host2.cb.forwardProtocolRegistration bool true
host2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.bl.forwardServiceRegistration bool true
host2.bl.forwardProtocolRegistration bool true
host2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.li.forwardServiceRegistration bool true
host2.li.forwardProtocolRegistration bool true
host2.eth.bitrate double
host2.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.nl.forwardServiceRegistration bool true
host2.nl.forwardProtocolRegistration bool true
host2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.tn.forwardServiceRegistration bool true
host2.tn.forwardProtocolRegistration bool true
host2.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.at.forwardServiceRegistration bool true
host2.at.forwardProtocolRegistration bool true
host3.status.initialStatus string "UP"

TODO @signal, @statistic
host3.pcapRecorder.verbose bool true

whether to log packets on the module output
host3.pcapRecorder.pcapFile string ""

the PCAP file to be written
host3.pcapRecorder.fileFormat string "pcapng"
host3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
host3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host3.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
host3.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
host3.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host3.pcapRecorder.displayStringTextFormat string "rec: %n pks"
host3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host3.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host3.cb.forwardServiceRegistration bool true
host3.cb.forwardProtocolRegistration bool true
host3.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host3.bl.forwardServiceRegistration bool true
host3.bl.forwardProtocolRegistration bool true
host3.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host3.li.forwardServiceRegistration bool true
host3.li.forwardProtocolRegistration bool true
host3.eth.bitrate double
host3.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host3.nl.forwardServiceRegistration bool true
host3.nl.forwardProtocolRegistration bool true
host3.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host3.tn.forwardServiceRegistration bool true
host3.tn.forwardProtocolRegistration bool true
host3.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host3.at.forwardServiceRegistration bool true
host3.at.forwardProtocolRegistration bool true
host4.status.initialStatus string "UP"

TODO @signal, @statistic
host4.pcapRecorder.verbose bool true

whether to log packets on the module output
host4.pcapRecorder.pcapFile string ""

the PCAP file to be written
host4.pcapRecorder.fileFormat string "pcapng"
host4.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host4.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host4.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
host4.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host4.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host4.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
host4.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
host4.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host4.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host4.pcapRecorder.displayStringTextFormat string "rec: %n pks"
host4.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host4.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host4.cb.forwardServiceRegistration bool true
host4.cb.forwardProtocolRegistration bool true
host4.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host4.bl.forwardServiceRegistration bool true
host4.bl.forwardProtocolRegistration bool true
host4.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host4.li.forwardServiceRegistration bool true
host4.li.forwardProtocolRegistration bool true
host4.eth.bitrate double
host4.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host4.nl.forwardServiceRegistration bool true
host4.nl.forwardProtocolRegistration bool true
host4.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host4.tn.forwardServiceRegistration bool true
host4.tn.forwardProtocolRegistration bool true
host4.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host4.at.forwardServiceRegistration bool true
host4.at.forwardProtocolRegistration bool true
host5.status.initialStatus string "UP"

TODO @signal, @statistic
host5.pcapRecorder.verbose bool true

whether to log packets on the module output
host5.pcapRecorder.pcapFile string ""

the PCAP file to be written
host5.pcapRecorder.fileFormat string "pcapng"
host5.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host5.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host5.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
host5.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host5.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host5.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
host5.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
host5.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host5.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host5.pcapRecorder.displayStringTextFormat string "rec: %n pks"
host5.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host5.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host5.cb.forwardServiceRegistration bool true
host5.cb.forwardProtocolRegistration bool true
host5.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host5.bl.forwardServiceRegistration bool true
host5.bl.forwardProtocolRegistration bool true
host5.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host5.li.forwardServiceRegistration bool true
host5.li.forwardProtocolRegistration bool true
host5.eth.bitrate double
host5.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host5.nl.forwardServiceRegistration bool true
host5.nl.forwardProtocolRegistration bool true
host5.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host5.tn.forwardServiceRegistration bool true
host5.tn.forwardProtocolRegistration bool true
host5.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host5.at.forwardServiceRegistration bool true
host5.at.forwardProtocolRegistration bool true
scenarioManager.script xml xml("")

Source code

//
// Example network to demonstrate Rsvp-TE.
//
// See the README file in the model directory for scenario description.
//
network RSVPTE4
{
    submodules:
        configurator: Ipv4NetworkConfigurator {
            parameters:
                @display("p=100,100;is=s");
        }
        LSR1: RsvpMplsRouter {
            parameters:
                @display("p=400,230");
        }
        LSR2: RsvpMplsRouter {
            parameters:
                @display("p=500,330");
        }
        LSR3: RsvpMplsRouter {
            parameters:
                @display("p=500,130");
        }
        LSR4: RsvpMplsRouter {
            parameters:
                @display("p=600,230");
        }
        LSR5: RsvpMplsRouter {
            parameters:
                @display("p=800,230");
        }
        LSR6: RsvpMplsRouter {
            parameters:
                @display("p=700,360");
        }
        LSR7: RsvpMplsRouter {
            parameters:
                @display("p=700,100");
        }
        host1: StandardHost { // client
            parameters:
                @display("p=250,130;i=device/pc2");
        }
        host2: StandardHost { // client
            parameters:
                @display("p=250,230;i=device/pc2");
        }
        host3: StandardHost { // server
            parameters:
                @display("p=900,130;i=device/server");
        }
        host4: StandardHost { // server
            parameters:
                @display("p=900,330;i=device/server");
        }
        host5: StandardHost { // client
            parameters:
                @display("p=250,330;i=device/pc2");
        }
        scenarioManager: ScenarioManager {
            parameters:
                @display("p=100,200;is=s");
        }
    connections:
        LSR1.pppg++ <--> {  delay = 15ms; datarate = 600kbps; } <--> LSR2.pppg++;
        LSR1.pppg++ <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR3.pppg++;
        host2.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR1.pppg++;
        host1.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR1.pppg++;
        LSR2.pppg++ <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR4.pppg++;
        LSR3.pppg++ <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR4.pppg++;
        LSR4.pppg++ <--> {  delay = 5ms; datarate = 600kbps; } <--> LSR5.pppg++;
        LSR5.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> host3.pppg++;
        LSR5.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> host4.pppg++;
        LSR2.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR6.pppg++;
        LSR5.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR6.pppg++;
        LSR3.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR7.pppg++;
        LSR5.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR7.pppg++;
        host5.pppg++ <--> {  delay = 10ms; datarate = 600kbps; } <--> LSR1.pppg++;
}
File: examples/mpls/testte_failure2/RSVPTE4.ned

This documentation is released under the Creative Commons license