R37

Package: inet.examples.mpls.net37

R37

network

(no description)

Ipv4NetworkConfigurator RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter RsvpMplsRouter StandardHost StandardHost

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.config xml xml("")

XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes bool true

add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes bool true

add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes bool true

add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes bool true

add direct routes (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
LSR0.status.initialStatus string "UP"

TODO @signal, @statistic
LSR0.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR0.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR0.ted.routingTableModule string
LSR0.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR0.linkStateRouting.routingTableModule string
LSR0.linkStateRouting.tedModule string
LSR0.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR0.rsvp.routingTableModule string
LSR0.rsvp.libTableModule string
LSR0.rsvp.tedModule string
LSR0.rsvp.traffic xml xml("")

specifies paths to set up
LSR0.rsvp.helloInterval double
LSR0.rsvp.helloTimeout double
LSR0.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR0.tn.forwardServiceRegistration bool true
LSR0.tn.forwardProtocolRegistration bool true
LSR0.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR0.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR0.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR0.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR0.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR0.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR0.ipv4.routingTable.routingFile string ""

routing table file name
LSR0.ipv4.natTable.networkProtocolModule string "^.ip"
LSR0.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR0.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR0.ipv4.up.forwardServiceRegistration bool true
LSR0.ipv4.up.forwardProtocolRegistration bool true
LSR0.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR0.ipv4.icmp.routingTableModule string
LSR0.ipv4.icmp.crcMode string "declared"
LSR0.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR0.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR0.ipv4.mp.forwardServiceRegistration bool true
LSR0.ipv4.mp.forwardProtocolRegistration bool true
LSR0.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR0.ipv4.lp.forwardServiceRegistration bool true
LSR0.ipv4.lp.forwardProtocolRegistration bool true
LSR0.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR0.nm.forwardServiceRegistration bool true
LSR0.nm.forwardProtocolRegistration bool true
LSR0.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR0.mpls.libTableModule string
LSR0.libTable.config xml xml("")

table contents to be loaded on startup
LSR0.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR0.ml.forwardServiceRegistration bool true
LSR0.ml.forwardProtocolRegistration bool true
LSR1.status.initialStatus string "UP"

TODO @signal, @statistic
LSR1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR1.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR1.ted.routingTableModule string
LSR1.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR1.linkStateRouting.routingTableModule string
LSR1.linkStateRouting.tedModule string
LSR1.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR1.rsvp.routingTableModule string
LSR1.rsvp.libTableModule string
LSR1.rsvp.tedModule string
LSR1.rsvp.traffic xml xml("")

specifies paths to set up
LSR1.rsvp.helloInterval double
LSR1.rsvp.helloTimeout double
LSR1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.tn.forwardServiceRegistration bool true
LSR1.tn.forwardProtocolRegistration bool true
LSR1.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR1.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR1.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR1.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR1.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR1.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR1.ipv4.routingTable.routingFile string ""

routing table file name
LSR1.ipv4.natTable.networkProtocolModule string "^.ip"
LSR1.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR1.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ipv4.up.forwardServiceRegistration bool true
LSR1.ipv4.up.forwardProtocolRegistration bool true
LSR1.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR1.ipv4.icmp.routingTableModule string
LSR1.ipv4.icmp.crcMode string "declared"
LSR1.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR1.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ipv4.mp.forwardServiceRegistration bool true
LSR1.ipv4.mp.forwardProtocolRegistration bool true
LSR1.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ipv4.lp.forwardServiceRegistration bool true
LSR1.ipv4.lp.forwardProtocolRegistration bool true
LSR1.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.nm.forwardServiceRegistration bool true
LSR1.nm.forwardProtocolRegistration bool true
LSR1.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR1.mpls.libTableModule string
LSR1.libTable.config xml xml("")

table contents to be loaded on startup
LSR1.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR1.ml.forwardServiceRegistration bool true
LSR1.ml.forwardProtocolRegistration bool true
LSR2.status.initialStatus string "UP"

TODO @signal, @statistic
LSR2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR2.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR2.ted.routingTableModule string
LSR2.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR2.linkStateRouting.routingTableModule string
LSR2.linkStateRouting.tedModule string
LSR2.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR2.rsvp.routingTableModule string
LSR2.rsvp.libTableModule string
LSR2.rsvp.tedModule string
LSR2.rsvp.traffic xml xml("")

specifies paths to set up
LSR2.rsvp.helloInterval double
LSR2.rsvp.helloTimeout double
LSR2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.tn.forwardServiceRegistration bool true
LSR2.tn.forwardProtocolRegistration bool true
LSR2.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR2.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR2.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR2.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR2.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR2.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR2.ipv4.routingTable.routingFile string ""

routing table file name
LSR2.ipv4.natTable.networkProtocolModule string "^.ip"
LSR2.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR2.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ipv4.up.forwardServiceRegistration bool true
LSR2.ipv4.up.forwardProtocolRegistration bool true
LSR2.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR2.ipv4.icmp.routingTableModule string
LSR2.ipv4.icmp.crcMode string "declared"
LSR2.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR2.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ipv4.mp.forwardServiceRegistration bool true
LSR2.ipv4.mp.forwardProtocolRegistration bool true
LSR2.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ipv4.lp.forwardServiceRegistration bool true
LSR2.ipv4.lp.forwardProtocolRegistration bool true
LSR2.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.nm.forwardServiceRegistration bool true
LSR2.nm.forwardProtocolRegistration bool true
LSR2.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR2.mpls.libTableModule string
LSR2.libTable.config xml xml("")

table contents to be loaded on startup
LSR2.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR2.ml.forwardServiceRegistration bool true
LSR2.ml.forwardProtocolRegistration bool true
LSR3.status.initialStatus string "UP"

TODO @signal, @statistic
LSR3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR3.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR3.ted.routingTableModule string
LSR3.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR3.linkStateRouting.routingTableModule string
LSR3.linkStateRouting.tedModule string
LSR3.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR3.rsvp.routingTableModule string
LSR3.rsvp.libTableModule string
LSR3.rsvp.tedModule string
LSR3.rsvp.traffic xml xml("")

specifies paths to set up
LSR3.rsvp.helloInterval double
LSR3.rsvp.helloTimeout double
LSR3.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.tn.forwardServiceRegistration bool true
LSR3.tn.forwardProtocolRegistration bool true
LSR3.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR3.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR3.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR3.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR3.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR3.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR3.ipv4.routingTable.routingFile string ""

routing table file name
LSR3.ipv4.natTable.networkProtocolModule string "^.ip"
LSR3.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR3.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ipv4.up.forwardServiceRegistration bool true
LSR3.ipv4.up.forwardProtocolRegistration bool true
LSR3.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR3.ipv4.icmp.routingTableModule string
LSR3.ipv4.icmp.crcMode string "declared"
LSR3.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR3.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ipv4.mp.forwardServiceRegistration bool true
LSR3.ipv4.mp.forwardProtocolRegistration bool true
LSR3.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ipv4.lp.forwardServiceRegistration bool true
LSR3.ipv4.lp.forwardProtocolRegistration bool true
LSR3.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.nm.forwardServiceRegistration bool true
LSR3.nm.forwardProtocolRegistration bool true
LSR3.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR3.mpls.libTableModule string
LSR3.libTable.config xml xml("")

table contents to be loaded on startup
LSR3.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR3.ml.forwardServiceRegistration bool true
LSR3.ml.forwardProtocolRegistration bool true
LSR4.status.initialStatus string "UP"

TODO @signal, @statistic
LSR4.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR4.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR4.ted.routingTableModule string
LSR4.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR4.linkStateRouting.routingTableModule string
LSR4.linkStateRouting.tedModule string
LSR4.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR4.rsvp.routingTableModule string
LSR4.rsvp.libTableModule string
LSR4.rsvp.tedModule string
LSR4.rsvp.traffic xml xml("")

specifies paths to set up
LSR4.rsvp.helloInterval double
LSR4.rsvp.helloTimeout double
LSR4.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.tn.forwardServiceRegistration bool true
LSR4.tn.forwardProtocolRegistration bool true
LSR4.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR4.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR4.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR4.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR4.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR4.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR4.ipv4.routingTable.routingFile string ""

routing table file name
LSR4.ipv4.natTable.networkProtocolModule string "^.ip"
LSR4.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR4.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ipv4.up.forwardServiceRegistration bool true
LSR4.ipv4.up.forwardProtocolRegistration bool true
LSR4.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR4.ipv4.icmp.routingTableModule string
LSR4.ipv4.icmp.crcMode string "declared"
LSR4.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR4.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ipv4.mp.forwardServiceRegistration bool true
LSR4.ipv4.mp.forwardProtocolRegistration bool true
LSR4.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ipv4.lp.forwardServiceRegistration bool true
LSR4.ipv4.lp.forwardProtocolRegistration bool true
LSR4.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.nm.forwardServiceRegistration bool true
LSR4.nm.forwardProtocolRegistration bool true
LSR4.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR4.mpls.libTableModule string
LSR4.libTable.config xml xml("")

table contents to be loaded on startup
LSR4.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR4.ml.forwardServiceRegistration bool true
LSR4.ml.forwardProtocolRegistration bool true
LSR5.status.initialStatus string "UP"

TODO @signal, @statistic
LSR5.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR5.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR5.ted.routingTableModule string
LSR5.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR5.linkStateRouting.routingTableModule string
LSR5.linkStateRouting.tedModule string
LSR5.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR5.rsvp.routingTableModule string
LSR5.rsvp.libTableModule string
LSR5.rsvp.tedModule string
LSR5.rsvp.traffic xml xml("")

specifies paths to set up
LSR5.rsvp.helloInterval double
LSR5.rsvp.helloTimeout double
LSR5.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.tn.forwardServiceRegistration bool true
LSR5.tn.forwardProtocolRegistration bool true
LSR5.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR5.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR5.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR5.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR5.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR5.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR5.ipv4.routingTable.routingFile string ""

routing table file name
LSR5.ipv4.natTable.networkProtocolModule string "^.ip"
LSR5.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR5.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ipv4.up.forwardServiceRegistration bool true
LSR5.ipv4.up.forwardProtocolRegistration bool true
LSR5.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR5.ipv4.icmp.routingTableModule string
LSR5.ipv4.icmp.crcMode string "declared"
LSR5.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR5.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ipv4.mp.forwardServiceRegistration bool true
LSR5.ipv4.mp.forwardProtocolRegistration bool true
LSR5.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ipv4.lp.forwardServiceRegistration bool true
LSR5.ipv4.lp.forwardProtocolRegistration bool true
LSR5.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.nm.forwardServiceRegistration bool true
LSR5.nm.forwardProtocolRegistration bool true
LSR5.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR5.mpls.libTableModule string
LSR5.libTable.config xml xml("")

table contents to be loaded on startup
LSR5.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR5.ml.forwardServiceRegistration bool true
LSR5.ml.forwardProtocolRegistration bool true
LSR6.status.initialStatus string "UP"

TODO @signal, @statistic
LSR6.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR6.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR6.ted.routingTableModule string
LSR6.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR6.linkStateRouting.routingTableModule string
LSR6.linkStateRouting.tedModule string
LSR6.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR6.rsvp.routingTableModule string
LSR6.rsvp.libTableModule string
LSR6.rsvp.tedModule string
LSR6.rsvp.traffic xml xml("")

specifies paths to set up
LSR6.rsvp.helloInterval double
LSR6.rsvp.helloTimeout double
LSR6.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.tn.forwardServiceRegistration bool true
LSR6.tn.forwardProtocolRegistration bool true
LSR6.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR6.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR6.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR6.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR6.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR6.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR6.ipv4.routingTable.routingFile string ""

routing table file name
LSR6.ipv4.natTable.networkProtocolModule string "^.ip"
LSR6.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR6.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ipv4.up.forwardServiceRegistration bool true
LSR6.ipv4.up.forwardProtocolRegistration bool true
LSR6.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR6.ipv4.icmp.routingTableModule string
LSR6.ipv4.icmp.crcMode string "declared"
LSR6.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR6.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ipv4.mp.forwardServiceRegistration bool true
LSR6.ipv4.mp.forwardProtocolRegistration bool true
LSR6.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ipv4.lp.forwardServiceRegistration bool true
LSR6.ipv4.lp.forwardProtocolRegistration bool true
LSR6.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.nm.forwardServiceRegistration bool true
LSR6.nm.forwardProtocolRegistration bool true
LSR6.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR6.mpls.libTableModule string
LSR6.libTable.config xml xml("")

table contents to be loaded on startup
LSR6.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR6.ml.forwardServiceRegistration bool true
LSR6.ml.forwardProtocolRegistration bool true
LSR7.status.initialStatus string "UP"

TODO @signal, @statistic
LSR7.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR7.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR7.ted.routingTableModule string
LSR7.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR7.linkStateRouting.routingTableModule string
LSR7.linkStateRouting.tedModule string
LSR7.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR7.rsvp.routingTableModule string
LSR7.rsvp.libTableModule string
LSR7.rsvp.tedModule string
LSR7.rsvp.traffic xml xml("")

specifies paths to set up
LSR7.rsvp.helloInterval double
LSR7.rsvp.helloTimeout double
LSR7.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.tn.forwardServiceRegistration bool true
LSR7.tn.forwardProtocolRegistration bool true
LSR7.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR7.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR7.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR7.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR7.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR7.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR7.ipv4.routingTable.routingFile string ""

routing table file name
LSR7.ipv4.natTable.networkProtocolModule string "^.ip"
LSR7.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR7.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ipv4.up.forwardServiceRegistration bool true
LSR7.ipv4.up.forwardProtocolRegistration bool true
LSR7.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR7.ipv4.icmp.routingTableModule string
LSR7.ipv4.icmp.crcMode string "declared"
LSR7.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR7.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ipv4.mp.forwardServiceRegistration bool true
LSR7.ipv4.mp.forwardProtocolRegistration bool true
LSR7.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ipv4.lp.forwardServiceRegistration bool true
LSR7.ipv4.lp.forwardProtocolRegistration bool true
LSR7.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.nm.forwardServiceRegistration bool true
LSR7.nm.forwardProtocolRegistration bool true
LSR7.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR7.mpls.libTableModule string
LSR7.libTable.config xml xml("")

table contents to be loaded on startup
LSR7.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR7.ml.forwardServiceRegistration bool true
LSR7.ml.forwardProtocolRegistration bool true
LSR8.status.initialStatus string "UP"

TODO @signal, @statistic
LSR8.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR8.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR8.ted.routingTableModule string
LSR8.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR8.linkStateRouting.routingTableModule string
LSR8.linkStateRouting.tedModule string
LSR8.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR8.rsvp.routingTableModule string
LSR8.rsvp.libTableModule string
LSR8.rsvp.tedModule string
LSR8.rsvp.traffic xml xml("")

specifies paths to set up
LSR8.rsvp.helloInterval double
LSR8.rsvp.helloTimeout double
LSR8.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR8.tn.forwardServiceRegistration bool true
LSR8.tn.forwardProtocolRegistration bool true
LSR8.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR8.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR8.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR8.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR8.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR8.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR8.ipv4.routingTable.routingFile string ""

routing table file name
LSR8.ipv4.natTable.networkProtocolModule string "^.ip"
LSR8.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR8.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR8.ipv4.up.forwardServiceRegistration bool true
LSR8.ipv4.up.forwardProtocolRegistration bool true
LSR8.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR8.ipv4.icmp.routingTableModule string
LSR8.ipv4.icmp.crcMode string "declared"
LSR8.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR8.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR8.ipv4.mp.forwardServiceRegistration bool true
LSR8.ipv4.mp.forwardProtocolRegistration bool true
LSR8.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR8.ipv4.lp.forwardServiceRegistration bool true
LSR8.ipv4.lp.forwardProtocolRegistration bool true
LSR8.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR8.nm.forwardServiceRegistration bool true
LSR8.nm.forwardProtocolRegistration bool true
LSR8.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR8.mpls.libTableModule string
LSR8.libTable.config xml xml("")

table contents to be loaded on startup
LSR8.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR8.ml.forwardServiceRegistration bool true
LSR8.ml.forwardProtocolRegistration bool true
LSR9.status.initialStatus string "UP"

TODO @signal, @statistic
LSR9.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR9.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR9.ted.routingTableModule string
LSR9.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR9.linkStateRouting.routingTableModule string
LSR9.linkStateRouting.tedModule string
LSR9.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR9.rsvp.routingTableModule string
LSR9.rsvp.libTableModule string
LSR9.rsvp.tedModule string
LSR9.rsvp.traffic xml xml("")

specifies paths to set up
LSR9.rsvp.helloInterval double
LSR9.rsvp.helloTimeout double
LSR9.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR9.tn.forwardServiceRegistration bool true
LSR9.tn.forwardProtocolRegistration bool true
LSR9.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR9.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR9.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR9.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR9.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR9.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR9.ipv4.routingTable.routingFile string ""

routing table file name
LSR9.ipv4.natTable.networkProtocolModule string "^.ip"
LSR9.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR9.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR9.ipv4.up.forwardServiceRegistration bool true
LSR9.ipv4.up.forwardProtocolRegistration bool true
LSR9.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR9.ipv4.icmp.routingTableModule string
LSR9.ipv4.icmp.crcMode string "declared"
LSR9.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR9.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR9.ipv4.mp.forwardServiceRegistration bool true
LSR9.ipv4.mp.forwardProtocolRegistration bool true
LSR9.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR9.ipv4.lp.forwardServiceRegistration bool true
LSR9.ipv4.lp.forwardProtocolRegistration bool true
LSR9.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR9.nm.forwardServiceRegistration bool true
LSR9.nm.forwardProtocolRegistration bool true
LSR9.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR9.mpls.libTableModule string
LSR9.libTable.config xml xml("")

table contents to be loaded on startup
LSR9.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR9.ml.forwardServiceRegistration bool true
LSR9.ml.forwardProtocolRegistration bool true
LSR10.status.initialStatus string "UP"

TODO @signal, @statistic
LSR10.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR10.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR10.ted.routingTableModule string
LSR10.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR10.linkStateRouting.routingTableModule string
LSR10.linkStateRouting.tedModule string
LSR10.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR10.rsvp.routingTableModule string
LSR10.rsvp.libTableModule string
LSR10.rsvp.tedModule string
LSR10.rsvp.traffic xml xml("")

specifies paths to set up
LSR10.rsvp.helloInterval double
LSR10.rsvp.helloTimeout double
LSR10.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR10.tn.forwardServiceRegistration bool true
LSR10.tn.forwardProtocolRegistration bool true
LSR10.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR10.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR10.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR10.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR10.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR10.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR10.ipv4.routingTable.routingFile string ""

routing table file name
LSR10.ipv4.natTable.networkProtocolModule string "^.ip"
LSR10.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR10.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR10.ipv4.up.forwardServiceRegistration bool true
LSR10.ipv4.up.forwardProtocolRegistration bool true
LSR10.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR10.ipv4.icmp.routingTableModule string
LSR10.ipv4.icmp.crcMode string "declared"
LSR10.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR10.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR10.ipv4.mp.forwardServiceRegistration bool true
LSR10.ipv4.mp.forwardProtocolRegistration bool true
LSR10.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR10.ipv4.lp.forwardServiceRegistration bool true
LSR10.ipv4.lp.forwardProtocolRegistration bool true
LSR10.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR10.nm.forwardServiceRegistration bool true
LSR10.nm.forwardProtocolRegistration bool true
LSR10.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR10.mpls.libTableModule string
LSR10.libTable.config xml xml("")

table contents to be loaded on startup
LSR10.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR10.ml.forwardServiceRegistration bool true
LSR10.ml.forwardProtocolRegistration bool true
LSR11.status.initialStatus string "UP"

TODO @signal, @statistic
LSR11.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR11.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR11.ted.routingTableModule string
LSR11.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR11.linkStateRouting.routingTableModule string
LSR11.linkStateRouting.tedModule string
LSR11.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR11.rsvp.routingTableModule string
LSR11.rsvp.libTableModule string
LSR11.rsvp.tedModule string
LSR11.rsvp.traffic xml xml("")

specifies paths to set up
LSR11.rsvp.helloInterval double
LSR11.rsvp.helloTimeout double
LSR11.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR11.tn.forwardServiceRegistration bool true
LSR11.tn.forwardProtocolRegistration bool true
LSR11.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR11.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR11.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR11.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR11.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR11.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR11.ipv4.routingTable.routingFile string ""

routing table file name
LSR11.ipv4.natTable.networkProtocolModule string "^.ip"
LSR11.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR11.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR11.ipv4.up.forwardServiceRegistration bool true
LSR11.ipv4.up.forwardProtocolRegistration bool true
LSR11.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR11.ipv4.icmp.routingTableModule string
LSR11.ipv4.icmp.crcMode string "declared"
LSR11.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR11.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR11.ipv4.mp.forwardServiceRegistration bool true
LSR11.ipv4.mp.forwardProtocolRegistration bool true
LSR11.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR11.ipv4.lp.forwardServiceRegistration bool true
LSR11.ipv4.lp.forwardProtocolRegistration bool true
LSR11.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR11.nm.forwardServiceRegistration bool true
LSR11.nm.forwardProtocolRegistration bool true
LSR11.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR11.mpls.libTableModule string
LSR11.libTable.config xml xml("")

table contents to be loaded on startup
LSR11.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR11.ml.forwardServiceRegistration bool true
LSR11.ml.forwardProtocolRegistration bool true
LSR12.status.initialStatus string "UP"

TODO @signal, @statistic
LSR12.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR12.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR12.ted.routingTableModule string
LSR12.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR12.linkStateRouting.routingTableModule string
LSR12.linkStateRouting.tedModule string
LSR12.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR12.rsvp.routingTableModule string
LSR12.rsvp.libTableModule string
LSR12.rsvp.tedModule string
LSR12.rsvp.traffic xml xml("")

specifies paths to set up
LSR12.rsvp.helloInterval double
LSR12.rsvp.helloTimeout double
LSR12.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR12.tn.forwardServiceRegistration bool true
LSR12.tn.forwardProtocolRegistration bool true
LSR12.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR12.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR12.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR12.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR12.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR12.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR12.ipv4.routingTable.routingFile string ""

routing table file name
LSR12.ipv4.natTable.networkProtocolModule string "^.ip"
LSR12.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR12.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR12.ipv4.up.forwardServiceRegistration bool true
LSR12.ipv4.up.forwardProtocolRegistration bool true
LSR12.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR12.ipv4.icmp.routingTableModule string
LSR12.ipv4.icmp.crcMode string "declared"
LSR12.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR12.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR12.ipv4.mp.forwardServiceRegistration bool true
LSR12.ipv4.mp.forwardProtocolRegistration bool true
LSR12.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR12.ipv4.lp.forwardServiceRegistration bool true
LSR12.ipv4.lp.forwardProtocolRegistration bool true
LSR12.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR12.nm.forwardServiceRegistration bool true
LSR12.nm.forwardProtocolRegistration bool true
LSR12.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR12.mpls.libTableModule string
LSR12.libTable.config xml xml("")

table contents to be loaded on startup
LSR12.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR12.ml.forwardServiceRegistration bool true
LSR12.ml.forwardProtocolRegistration bool true
LSR13.status.initialStatus string "UP"

TODO @signal, @statistic
LSR13.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR13.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR13.ted.routingTableModule string
LSR13.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR13.linkStateRouting.routingTableModule string
LSR13.linkStateRouting.tedModule string
LSR13.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR13.rsvp.routingTableModule string
LSR13.rsvp.libTableModule string
LSR13.rsvp.tedModule string
LSR13.rsvp.traffic xml xml("")

specifies paths to set up
LSR13.rsvp.helloInterval double
LSR13.rsvp.helloTimeout double
LSR13.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR13.tn.forwardServiceRegistration bool true
LSR13.tn.forwardProtocolRegistration bool true
LSR13.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR13.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR13.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR13.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR13.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR13.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR13.ipv4.routingTable.routingFile string ""

routing table file name
LSR13.ipv4.natTable.networkProtocolModule string "^.ip"
LSR13.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR13.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR13.ipv4.up.forwardServiceRegistration bool true
LSR13.ipv4.up.forwardProtocolRegistration bool true
LSR13.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR13.ipv4.icmp.routingTableModule string
LSR13.ipv4.icmp.crcMode string "declared"
LSR13.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR13.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR13.ipv4.mp.forwardServiceRegistration bool true
LSR13.ipv4.mp.forwardProtocolRegistration bool true
LSR13.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR13.ipv4.lp.forwardServiceRegistration bool true
LSR13.ipv4.lp.forwardProtocolRegistration bool true
LSR13.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR13.nm.forwardServiceRegistration bool true
LSR13.nm.forwardProtocolRegistration bool true
LSR13.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR13.mpls.libTableModule string
LSR13.libTable.config xml xml("")

table contents to be loaded on startup
LSR13.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR13.ml.forwardServiceRegistration bool true
LSR13.ml.forwardProtocolRegistration bool true
LSR14.status.initialStatus string "UP"

TODO @signal, @statistic
LSR14.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR14.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR14.ted.routingTableModule string
LSR14.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR14.linkStateRouting.routingTableModule string
LSR14.linkStateRouting.tedModule string
LSR14.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR14.rsvp.routingTableModule string
LSR14.rsvp.libTableModule string
LSR14.rsvp.tedModule string
LSR14.rsvp.traffic xml xml("")

specifies paths to set up
LSR14.rsvp.helloInterval double
LSR14.rsvp.helloTimeout double
LSR14.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR14.tn.forwardServiceRegistration bool true
LSR14.tn.forwardProtocolRegistration bool true
LSR14.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR14.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR14.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR14.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR14.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR14.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR14.ipv4.routingTable.routingFile string ""

routing table file name
LSR14.ipv4.natTable.networkProtocolModule string "^.ip"
LSR14.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR14.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR14.ipv4.up.forwardServiceRegistration bool true
LSR14.ipv4.up.forwardProtocolRegistration bool true
LSR14.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR14.ipv4.icmp.routingTableModule string
LSR14.ipv4.icmp.crcMode string "declared"
LSR14.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR14.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR14.ipv4.mp.forwardServiceRegistration bool true
LSR14.ipv4.mp.forwardProtocolRegistration bool true
LSR14.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR14.ipv4.lp.forwardServiceRegistration bool true
LSR14.ipv4.lp.forwardProtocolRegistration bool true
LSR14.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR14.nm.forwardServiceRegistration bool true
LSR14.nm.forwardProtocolRegistration bool true
LSR14.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR14.mpls.libTableModule string
LSR14.libTable.config xml xml("")

table contents to be loaded on startup
LSR14.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR14.ml.forwardServiceRegistration bool true
LSR14.ml.forwardProtocolRegistration bool true
LSR15.status.initialStatus string "UP"

TODO @signal, @statistic
LSR15.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR15.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR15.ted.routingTableModule string
LSR15.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR15.linkStateRouting.routingTableModule string
LSR15.linkStateRouting.tedModule string
LSR15.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR15.rsvp.routingTableModule string
LSR15.rsvp.libTableModule string
LSR15.rsvp.tedModule string
LSR15.rsvp.traffic xml xml("")

specifies paths to set up
LSR15.rsvp.helloInterval double
LSR15.rsvp.helloTimeout double
LSR15.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR15.tn.forwardServiceRegistration bool true
LSR15.tn.forwardProtocolRegistration bool true
LSR15.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR15.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR15.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR15.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR15.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR15.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR15.ipv4.routingTable.routingFile string ""

routing table file name
LSR15.ipv4.natTable.networkProtocolModule string "^.ip"
LSR15.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR15.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR15.ipv4.up.forwardServiceRegistration bool true
LSR15.ipv4.up.forwardProtocolRegistration bool true
LSR15.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR15.ipv4.icmp.routingTableModule string
LSR15.ipv4.icmp.crcMode string "declared"
LSR15.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR15.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR15.ipv4.mp.forwardServiceRegistration bool true
LSR15.ipv4.mp.forwardProtocolRegistration bool true
LSR15.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR15.ipv4.lp.forwardServiceRegistration bool true
LSR15.ipv4.lp.forwardProtocolRegistration bool true
LSR15.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR15.nm.forwardServiceRegistration bool true
LSR15.nm.forwardProtocolRegistration bool true
LSR15.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR15.mpls.libTableModule string
LSR15.libTable.config xml xml("")

table contents to be loaded on startup
LSR15.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR15.ml.forwardServiceRegistration bool true
LSR15.ml.forwardProtocolRegistration bool true
LSR16.status.initialStatus string "UP"

TODO @signal, @statistic
LSR16.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR16.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR16.ted.routingTableModule string
LSR16.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR16.linkStateRouting.routingTableModule string
LSR16.linkStateRouting.tedModule string
LSR16.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR16.rsvp.routingTableModule string
LSR16.rsvp.libTableModule string
LSR16.rsvp.tedModule string
LSR16.rsvp.traffic xml xml("")

specifies paths to set up
LSR16.rsvp.helloInterval double
LSR16.rsvp.helloTimeout double
LSR16.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR16.tn.forwardServiceRegistration bool true
LSR16.tn.forwardProtocolRegistration bool true
LSR16.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR16.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR16.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR16.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR16.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR16.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR16.ipv4.routingTable.routingFile string ""

routing table file name
LSR16.ipv4.natTable.networkProtocolModule string "^.ip"
LSR16.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR16.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR16.ipv4.up.forwardServiceRegistration bool true
LSR16.ipv4.up.forwardProtocolRegistration bool true
LSR16.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR16.ipv4.icmp.routingTableModule string
LSR16.ipv4.icmp.crcMode string "declared"
LSR16.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR16.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR16.ipv4.mp.forwardServiceRegistration bool true
LSR16.ipv4.mp.forwardProtocolRegistration bool true
LSR16.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR16.ipv4.lp.forwardServiceRegistration bool true
LSR16.ipv4.lp.forwardProtocolRegistration bool true
LSR16.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR16.nm.forwardServiceRegistration bool true
LSR16.nm.forwardProtocolRegistration bool true
LSR16.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR16.mpls.libTableModule string
LSR16.libTable.config xml xml("")

table contents to be loaded on startup
LSR16.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR16.ml.forwardServiceRegistration bool true
LSR16.ml.forwardProtocolRegistration bool true
LSR17.status.initialStatus string "UP"

TODO @signal, @statistic
LSR17.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR17.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR17.ted.routingTableModule string
LSR17.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR17.linkStateRouting.routingTableModule string
LSR17.linkStateRouting.tedModule string
LSR17.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR17.rsvp.routingTableModule string
LSR17.rsvp.libTableModule string
LSR17.rsvp.tedModule string
LSR17.rsvp.traffic xml xml("")

specifies paths to set up
LSR17.rsvp.helloInterval double
LSR17.rsvp.helloTimeout double
LSR17.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR17.tn.forwardServiceRegistration bool true
LSR17.tn.forwardProtocolRegistration bool true
LSR17.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR17.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR17.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR17.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR17.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR17.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR17.ipv4.routingTable.routingFile string ""

routing table file name
LSR17.ipv4.natTable.networkProtocolModule string "^.ip"
LSR17.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR17.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR17.ipv4.up.forwardServiceRegistration bool true
LSR17.ipv4.up.forwardProtocolRegistration bool true
LSR17.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR17.ipv4.icmp.routingTableModule string
LSR17.ipv4.icmp.crcMode string "declared"
LSR17.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR17.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR17.ipv4.mp.forwardServiceRegistration bool true
LSR17.ipv4.mp.forwardProtocolRegistration bool true
LSR17.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR17.ipv4.lp.forwardServiceRegistration bool true
LSR17.ipv4.lp.forwardProtocolRegistration bool true
LSR17.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR17.nm.forwardServiceRegistration bool true
LSR17.nm.forwardProtocolRegistration bool true
LSR17.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR17.mpls.libTableModule string
LSR17.libTable.config xml xml("")

table contents to be loaded on startup
LSR17.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR17.ml.forwardServiceRegistration bool true
LSR17.ml.forwardProtocolRegistration bool true
LSR18.status.initialStatus string "UP"

TODO @signal, @statistic
LSR18.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR18.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR18.ted.routingTableModule string
LSR18.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR18.linkStateRouting.routingTableModule string
LSR18.linkStateRouting.tedModule string
LSR18.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR18.rsvp.routingTableModule string
LSR18.rsvp.libTableModule string
LSR18.rsvp.tedModule string
LSR18.rsvp.traffic xml xml("")

specifies paths to set up
LSR18.rsvp.helloInterval double
LSR18.rsvp.helloTimeout double
LSR18.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR18.tn.forwardServiceRegistration bool true
LSR18.tn.forwardProtocolRegistration bool true
LSR18.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR18.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR18.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR18.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR18.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR18.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR18.ipv4.routingTable.routingFile string ""

routing table file name
LSR18.ipv4.natTable.networkProtocolModule string "^.ip"
LSR18.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR18.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR18.ipv4.up.forwardServiceRegistration bool true
LSR18.ipv4.up.forwardProtocolRegistration bool true
LSR18.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR18.ipv4.icmp.routingTableModule string
LSR18.ipv4.icmp.crcMode string "declared"
LSR18.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR18.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR18.ipv4.mp.forwardServiceRegistration bool true
LSR18.ipv4.mp.forwardProtocolRegistration bool true
LSR18.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR18.ipv4.lp.forwardServiceRegistration bool true
LSR18.ipv4.lp.forwardProtocolRegistration bool true
LSR18.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR18.nm.forwardServiceRegistration bool true
LSR18.nm.forwardProtocolRegistration bool true
LSR18.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR18.mpls.libTableModule string
LSR18.libTable.config xml xml("")

table contents to be loaded on startup
LSR18.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR18.ml.forwardServiceRegistration bool true
LSR18.ml.forwardProtocolRegistration bool true
LSR19.status.initialStatus string "UP"

TODO @signal, @statistic
LSR19.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR19.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR19.ted.routingTableModule string
LSR19.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR19.linkStateRouting.routingTableModule string
LSR19.linkStateRouting.tedModule string
LSR19.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR19.rsvp.routingTableModule string
LSR19.rsvp.libTableModule string
LSR19.rsvp.tedModule string
LSR19.rsvp.traffic xml xml("")

specifies paths to set up
LSR19.rsvp.helloInterval double
LSR19.rsvp.helloTimeout double
LSR19.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR19.tn.forwardServiceRegistration bool true
LSR19.tn.forwardProtocolRegistration bool true
LSR19.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR19.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR19.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR19.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR19.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR19.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR19.ipv4.routingTable.routingFile string ""

routing table file name
LSR19.ipv4.natTable.networkProtocolModule string "^.ip"
LSR19.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR19.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR19.ipv4.up.forwardServiceRegistration bool true
LSR19.ipv4.up.forwardProtocolRegistration bool true
LSR19.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR19.ipv4.icmp.routingTableModule string
LSR19.ipv4.icmp.crcMode string "declared"
LSR19.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR19.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR19.ipv4.mp.forwardServiceRegistration bool true
LSR19.ipv4.mp.forwardProtocolRegistration bool true
LSR19.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR19.ipv4.lp.forwardServiceRegistration bool true
LSR19.ipv4.lp.forwardProtocolRegistration bool true
LSR19.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR19.nm.forwardServiceRegistration bool true
LSR19.nm.forwardProtocolRegistration bool true
LSR19.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR19.mpls.libTableModule string
LSR19.libTable.config xml xml("")

table contents to be loaded on startup
LSR19.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR19.ml.forwardServiceRegistration bool true
LSR19.ml.forwardProtocolRegistration bool true
LSR20.status.initialStatus string "UP"

TODO @signal, @statistic
LSR20.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR20.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR20.ted.routingTableModule string
LSR20.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR20.linkStateRouting.routingTableModule string
LSR20.linkStateRouting.tedModule string
LSR20.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR20.rsvp.routingTableModule string
LSR20.rsvp.libTableModule string
LSR20.rsvp.tedModule string
LSR20.rsvp.traffic xml xml("")

specifies paths to set up
LSR20.rsvp.helloInterval double
LSR20.rsvp.helloTimeout double
LSR20.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR20.tn.forwardServiceRegistration bool true
LSR20.tn.forwardProtocolRegistration bool true
LSR20.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR20.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR20.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR20.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR20.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR20.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR20.ipv4.routingTable.routingFile string ""

routing table file name
LSR20.ipv4.natTable.networkProtocolModule string "^.ip"
LSR20.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR20.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR20.ipv4.up.forwardServiceRegistration bool true
LSR20.ipv4.up.forwardProtocolRegistration bool true
LSR20.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR20.ipv4.icmp.routingTableModule string
LSR20.ipv4.icmp.crcMode string "declared"
LSR20.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR20.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR20.ipv4.mp.forwardServiceRegistration bool true
LSR20.ipv4.mp.forwardProtocolRegistration bool true
LSR20.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR20.ipv4.lp.forwardServiceRegistration bool true
LSR20.ipv4.lp.forwardProtocolRegistration bool true
LSR20.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR20.nm.forwardServiceRegistration bool true
LSR20.nm.forwardProtocolRegistration bool true
LSR20.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR20.mpls.libTableModule string
LSR20.libTable.config xml xml("")

table contents to be loaded on startup
LSR20.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR20.ml.forwardServiceRegistration bool true
LSR20.ml.forwardProtocolRegistration bool true
LSR21.status.initialStatus string "UP"

TODO @signal, @statistic
LSR21.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR21.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR21.ted.routingTableModule string
LSR21.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR21.linkStateRouting.routingTableModule string
LSR21.linkStateRouting.tedModule string
LSR21.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR21.rsvp.routingTableModule string
LSR21.rsvp.libTableModule string
LSR21.rsvp.tedModule string
LSR21.rsvp.traffic xml xml("")

specifies paths to set up
LSR21.rsvp.helloInterval double
LSR21.rsvp.helloTimeout double
LSR21.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR21.tn.forwardServiceRegistration bool true
LSR21.tn.forwardProtocolRegistration bool true
LSR21.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR21.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR21.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR21.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR21.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR21.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR21.ipv4.routingTable.routingFile string ""

routing table file name
LSR21.ipv4.natTable.networkProtocolModule string "^.ip"
LSR21.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR21.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR21.ipv4.up.forwardServiceRegistration bool true
LSR21.ipv4.up.forwardProtocolRegistration bool true
LSR21.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR21.ipv4.icmp.routingTableModule string
LSR21.ipv4.icmp.crcMode string "declared"
LSR21.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR21.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR21.ipv4.mp.forwardServiceRegistration bool true
LSR21.ipv4.mp.forwardProtocolRegistration bool true
LSR21.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR21.ipv4.lp.forwardServiceRegistration bool true
LSR21.ipv4.lp.forwardProtocolRegistration bool true
LSR21.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR21.nm.forwardServiceRegistration bool true
LSR21.nm.forwardProtocolRegistration bool true
LSR21.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR21.mpls.libTableModule string
LSR21.libTable.config xml xml("")

table contents to be loaded on startup
LSR21.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR21.ml.forwardServiceRegistration bool true
LSR21.ml.forwardProtocolRegistration bool true
LSR22.status.initialStatus string "UP"

TODO @signal, @statistic
LSR22.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR22.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR22.ted.routingTableModule string
LSR22.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR22.linkStateRouting.routingTableModule string
LSR22.linkStateRouting.tedModule string
LSR22.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR22.rsvp.routingTableModule string
LSR22.rsvp.libTableModule string
LSR22.rsvp.tedModule string
LSR22.rsvp.traffic xml xml("")

specifies paths to set up
LSR22.rsvp.helloInterval double
LSR22.rsvp.helloTimeout double
LSR22.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR22.tn.forwardServiceRegistration bool true
LSR22.tn.forwardProtocolRegistration bool true
LSR22.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR22.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR22.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR22.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR22.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR22.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR22.ipv4.routingTable.routingFile string ""

routing table file name
LSR22.ipv4.natTable.networkProtocolModule string "^.ip"
LSR22.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR22.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR22.ipv4.up.forwardServiceRegistration bool true
LSR22.ipv4.up.forwardProtocolRegistration bool true
LSR22.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR22.ipv4.icmp.routingTableModule string
LSR22.ipv4.icmp.crcMode string "declared"
LSR22.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR22.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR22.ipv4.mp.forwardServiceRegistration bool true
LSR22.ipv4.mp.forwardProtocolRegistration bool true
LSR22.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR22.ipv4.lp.forwardServiceRegistration bool true
LSR22.ipv4.lp.forwardProtocolRegistration bool true
LSR22.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR22.nm.forwardServiceRegistration bool true
LSR22.nm.forwardProtocolRegistration bool true
LSR22.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR22.mpls.libTableModule string
LSR22.libTable.config xml xml("")

table contents to be loaded on startup
LSR22.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR22.ml.forwardServiceRegistration bool true
LSR22.ml.forwardProtocolRegistration bool true
LSR23.status.initialStatus string "UP"

TODO @signal, @statistic
LSR23.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR23.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR23.ted.routingTableModule string
LSR23.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR23.linkStateRouting.routingTableModule string
LSR23.linkStateRouting.tedModule string
LSR23.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR23.rsvp.routingTableModule string
LSR23.rsvp.libTableModule string
LSR23.rsvp.tedModule string
LSR23.rsvp.traffic xml xml("")

specifies paths to set up
LSR23.rsvp.helloInterval double
LSR23.rsvp.helloTimeout double
LSR23.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR23.tn.forwardServiceRegistration bool true
LSR23.tn.forwardProtocolRegistration bool true
LSR23.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR23.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR23.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR23.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR23.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR23.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR23.ipv4.routingTable.routingFile string ""

routing table file name
LSR23.ipv4.natTable.networkProtocolModule string "^.ip"
LSR23.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR23.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR23.ipv4.up.forwardServiceRegistration bool true
LSR23.ipv4.up.forwardProtocolRegistration bool true
LSR23.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR23.ipv4.icmp.routingTableModule string
LSR23.ipv4.icmp.crcMode string "declared"
LSR23.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR23.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR23.ipv4.mp.forwardServiceRegistration bool true
LSR23.ipv4.mp.forwardProtocolRegistration bool true
LSR23.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR23.ipv4.lp.forwardServiceRegistration bool true
LSR23.ipv4.lp.forwardProtocolRegistration bool true
LSR23.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR23.nm.forwardServiceRegistration bool true
LSR23.nm.forwardProtocolRegistration bool true
LSR23.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR23.mpls.libTableModule string
LSR23.libTable.config xml xml("")

table contents to be loaded on startup
LSR23.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR23.ml.forwardServiceRegistration bool true
LSR23.ml.forwardProtocolRegistration bool true
LSR24.status.initialStatus string "UP"

TODO @signal, @statistic
LSR24.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR24.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR24.ted.routingTableModule string
LSR24.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR24.linkStateRouting.routingTableModule string
LSR24.linkStateRouting.tedModule string
LSR24.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR24.rsvp.routingTableModule string
LSR24.rsvp.libTableModule string
LSR24.rsvp.tedModule string
LSR24.rsvp.traffic xml xml("")

specifies paths to set up
LSR24.rsvp.helloInterval double
LSR24.rsvp.helloTimeout double
LSR24.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR24.tn.forwardServiceRegistration bool true
LSR24.tn.forwardProtocolRegistration bool true
LSR24.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR24.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR24.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR24.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR24.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR24.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR24.ipv4.routingTable.routingFile string ""

routing table file name
LSR24.ipv4.natTable.networkProtocolModule string "^.ip"
LSR24.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR24.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR24.ipv4.up.forwardServiceRegistration bool true
LSR24.ipv4.up.forwardProtocolRegistration bool true
LSR24.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR24.ipv4.icmp.routingTableModule string
LSR24.ipv4.icmp.crcMode string "declared"
LSR24.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR24.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR24.ipv4.mp.forwardServiceRegistration bool true
LSR24.ipv4.mp.forwardProtocolRegistration bool true
LSR24.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR24.ipv4.lp.forwardServiceRegistration bool true
LSR24.ipv4.lp.forwardProtocolRegistration bool true
LSR24.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR24.nm.forwardServiceRegistration bool true
LSR24.nm.forwardProtocolRegistration bool true
LSR24.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR24.mpls.libTableModule string
LSR24.libTable.config xml xml("")

table contents to be loaded on startup
LSR24.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR24.ml.forwardServiceRegistration bool true
LSR24.ml.forwardProtocolRegistration bool true
LSR25.status.initialStatus string "UP"

TODO @signal, @statistic
LSR25.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR25.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR25.ted.routingTableModule string
LSR25.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR25.linkStateRouting.routingTableModule string
LSR25.linkStateRouting.tedModule string
LSR25.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR25.rsvp.routingTableModule string
LSR25.rsvp.libTableModule string
LSR25.rsvp.tedModule string
LSR25.rsvp.traffic xml xml("")

specifies paths to set up
LSR25.rsvp.helloInterval double
LSR25.rsvp.helloTimeout double
LSR25.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR25.tn.forwardServiceRegistration bool true
LSR25.tn.forwardProtocolRegistration bool true
LSR25.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR25.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR25.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR25.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR25.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR25.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR25.ipv4.routingTable.routingFile string ""

routing table file name
LSR25.ipv4.natTable.networkProtocolModule string "^.ip"
LSR25.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR25.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR25.ipv4.up.forwardServiceRegistration bool true
LSR25.ipv4.up.forwardProtocolRegistration bool true
LSR25.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR25.ipv4.icmp.routingTableModule string
LSR25.ipv4.icmp.crcMode string "declared"
LSR25.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR25.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR25.ipv4.mp.forwardServiceRegistration bool true
LSR25.ipv4.mp.forwardProtocolRegistration bool true
LSR25.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR25.ipv4.lp.forwardServiceRegistration bool true
LSR25.ipv4.lp.forwardProtocolRegistration bool true
LSR25.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR25.nm.forwardServiceRegistration bool true
LSR25.nm.forwardProtocolRegistration bool true
LSR25.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR25.mpls.libTableModule string
LSR25.libTable.config xml xml("")

table contents to be loaded on startup
LSR25.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR25.ml.forwardServiceRegistration bool true
LSR25.ml.forwardProtocolRegistration bool true
LSR26.status.initialStatus string "UP"

TODO @signal, @statistic
LSR26.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR26.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR26.ted.routingTableModule string
LSR26.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR26.linkStateRouting.routingTableModule string
LSR26.linkStateRouting.tedModule string
LSR26.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR26.rsvp.routingTableModule string
LSR26.rsvp.libTableModule string
LSR26.rsvp.tedModule string
LSR26.rsvp.traffic xml xml("")

specifies paths to set up
LSR26.rsvp.helloInterval double
LSR26.rsvp.helloTimeout double
LSR26.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR26.tn.forwardServiceRegistration bool true
LSR26.tn.forwardProtocolRegistration bool true
LSR26.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR26.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR26.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR26.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR26.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR26.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR26.ipv4.routingTable.routingFile string ""

routing table file name
LSR26.ipv4.natTable.networkProtocolModule string "^.ip"
LSR26.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR26.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR26.ipv4.up.forwardServiceRegistration bool true
LSR26.ipv4.up.forwardProtocolRegistration bool true
LSR26.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR26.ipv4.icmp.routingTableModule string
LSR26.ipv4.icmp.crcMode string "declared"
LSR26.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR26.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR26.ipv4.mp.forwardServiceRegistration bool true
LSR26.ipv4.mp.forwardProtocolRegistration bool true
LSR26.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR26.ipv4.lp.forwardServiceRegistration bool true
LSR26.ipv4.lp.forwardProtocolRegistration bool true
LSR26.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR26.nm.forwardServiceRegistration bool true
LSR26.nm.forwardProtocolRegistration bool true
LSR26.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR26.mpls.libTableModule string
LSR26.libTable.config xml xml("")

table contents to be loaded on startup
LSR26.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR26.ml.forwardServiceRegistration bool true
LSR26.ml.forwardProtocolRegistration bool true
LSR27.status.initialStatus string "UP"

TODO @signal, @statistic
LSR27.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR27.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR27.ted.routingTableModule string
LSR27.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR27.linkStateRouting.routingTableModule string
LSR27.linkStateRouting.tedModule string
LSR27.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR27.rsvp.routingTableModule string
LSR27.rsvp.libTableModule string
LSR27.rsvp.tedModule string
LSR27.rsvp.traffic xml xml("")

specifies paths to set up
LSR27.rsvp.helloInterval double
LSR27.rsvp.helloTimeout double
LSR27.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR27.tn.forwardServiceRegistration bool true
LSR27.tn.forwardProtocolRegistration bool true
LSR27.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR27.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR27.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR27.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR27.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR27.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR27.ipv4.routingTable.routingFile string ""

routing table file name
LSR27.ipv4.natTable.networkProtocolModule string "^.ip"
LSR27.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR27.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR27.ipv4.up.forwardServiceRegistration bool true
LSR27.ipv4.up.forwardProtocolRegistration bool true
LSR27.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR27.ipv4.icmp.routingTableModule string
LSR27.ipv4.icmp.crcMode string "declared"
LSR27.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR27.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR27.ipv4.mp.forwardServiceRegistration bool true
LSR27.ipv4.mp.forwardProtocolRegistration bool true
LSR27.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR27.ipv4.lp.forwardServiceRegistration bool true
LSR27.ipv4.lp.forwardProtocolRegistration bool true
LSR27.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR27.nm.forwardServiceRegistration bool true
LSR27.nm.forwardProtocolRegistration bool true
LSR27.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR27.mpls.libTableModule string
LSR27.libTable.config xml xml("")

table contents to be loaded on startup
LSR27.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR27.ml.forwardServiceRegistration bool true
LSR27.ml.forwardProtocolRegistration bool true
LSR28.status.initialStatus string "UP"

TODO @signal, @statistic
LSR28.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR28.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR28.ted.routingTableModule string
LSR28.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR28.linkStateRouting.routingTableModule string
LSR28.linkStateRouting.tedModule string
LSR28.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR28.rsvp.routingTableModule string
LSR28.rsvp.libTableModule string
LSR28.rsvp.tedModule string
LSR28.rsvp.traffic xml xml("")

specifies paths to set up
LSR28.rsvp.helloInterval double
LSR28.rsvp.helloTimeout double
LSR28.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR28.tn.forwardServiceRegistration bool true
LSR28.tn.forwardProtocolRegistration bool true
LSR28.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR28.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR28.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR28.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR28.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR28.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR28.ipv4.routingTable.routingFile string ""

routing table file name
LSR28.ipv4.natTable.networkProtocolModule string "^.ip"
LSR28.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR28.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR28.ipv4.up.forwardServiceRegistration bool true
LSR28.ipv4.up.forwardProtocolRegistration bool true
LSR28.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR28.ipv4.icmp.routingTableModule string
LSR28.ipv4.icmp.crcMode string "declared"
LSR28.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR28.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR28.ipv4.mp.forwardServiceRegistration bool true
LSR28.ipv4.mp.forwardProtocolRegistration bool true
LSR28.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR28.ipv4.lp.forwardServiceRegistration bool true
LSR28.ipv4.lp.forwardProtocolRegistration bool true
LSR28.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR28.nm.forwardServiceRegistration bool true
LSR28.nm.forwardProtocolRegistration bool true
LSR28.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR28.mpls.libTableModule string
LSR28.libTable.config xml xml("")

table contents to be loaded on startup
LSR28.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR28.ml.forwardServiceRegistration bool true
LSR28.ml.forwardProtocolRegistration bool true
LSR29.status.initialStatus string "UP"

TODO @signal, @statistic
LSR29.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR29.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR29.ted.routingTableModule string
LSR29.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR29.linkStateRouting.routingTableModule string
LSR29.linkStateRouting.tedModule string
LSR29.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR29.rsvp.routingTableModule string
LSR29.rsvp.libTableModule string
LSR29.rsvp.tedModule string
LSR29.rsvp.traffic xml xml("")

specifies paths to set up
LSR29.rsvp.helloInterval double
LSR29.rsvp.helloTimeout double
LSR29.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR29.tn.forwardServiceRegistration bool true
LSR29.tn.forwardProtocolRegistration bool true
LSR29.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR29.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR29.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR29.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR29.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR29.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR29.ipv4.routingTable.routingFile string ""

routing table file name
LSR29.ipv4.natTable.networkProtocolModule string "^.ip"
LSR29.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR29.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR29.ipv4.up.forwardServiceRegistration bool true
LSR29.ipv4.up.forwardProtocolRegistration bool true
LSR29.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR29.ipv4.icmp.routingTableModule string
LSR29.ipv4.icmp.crcMode string "declared"
LSR29.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR29.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR29.ipv4.mp.forwardServiceRegistration bool true
LSR29.ipv4.mp.forwardProtocolRegistration bool true
LSR29.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR29.ipv4.lp.forwardServiceRegistration bool true
LSR29.ipv4.lp.forwardProtocolRegistration bool true
LSR29.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR29.nm.forwardServiceRegistration bool true
LSR29.nm.forwardProtocolRegistration bool true
LSR29.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR29.mpls.libTableModule string
LSR29.libTable.config xml xml("")

table contents to be loaded on startup
LSR29.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR29.ml.forwardServiceRegistration bool true
LSR29.ml.forwardProtocolRegistration bool true
LSR30.status.initialStatus string "UP"

TODO @signal, @statistic
LSR30.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR30.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR30.ted.routingTableModule string
LSR30.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR30.linkStateRouting.routingTableModule string
LSR30.linkStateRouting.tedModule string
LSR30.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR30.rsvp.routingTableModule string
LSR30.rsvp.libTableModule string
LSR30.rsvp.tedModule string
LSR30.rsvp.traffic xml xml("")

specifies paths to set up
LSR30.rsvp.helloInterval double
LSR30.rsvp.helloTimeout double
LSR30.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR30.tn.forwardServiceRegistration bool true
LSR30.tn.forwardProtocolRegistration bool true
LSR30.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR30.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR30.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR30.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR30.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR30.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR30.ipv4.routingTable.routingFile string ""

routing table file name
LSR30.ipv4.natTable.networkProtocolModule string "^.ip"
LSR30.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR30.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR30.ipv4.up.forwardServiceRegistration bool true
LSR30.ipv4.up.forwardProtocolRegistration bool true
LSR30.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR30.ipv4.icmp.routingTableModule string
LSR30.ipv4.icmp.crcMode string "declared"
LSR30.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR30.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR30.ipv4.mp.forwardServiceRegistration bool true
LSR30.ipv4.mp.forwardProtocolRegistration bool true
LSR30.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR30.ipv4.lp.forwardServiceRegistration bool true
LSR30.ipv4.lp.forwardProtocolRegistration bool true
LSR30.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR30.nm.forwardServiceRegistration bool true
LSR30.nm.forwardProtocolRegistration bool true
LSR30.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR30.mpls.libTableModule string
LSR30.libTable.config xml xml("")

table contents to be loaded on startup
LSR30.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR30.ml.forwardServiceRegistration bool true
LSR30.ml.forwardProtocolRegistration bool true
LSR31.status.initialStatus string "UP"

TODO @signal, @statistic
LSR31.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR31.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR31.ted.routingTableModule string
LSR31.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR31.linkStateRouting.routingTableModule string
LSR31.linkStateRouting.tedModule string
LSR31.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR31.rsvp.routingTableModule string
LSR31.rsvp.libTableModule string
LSR31.rsvp.tedModule string
LSR31.rsvp.traffic xml xml("")

specifies paths to set up
LSR31.rsvp.helloInterval double
LSR31.rsvp.helloTimeout double
LSR31.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR31.tn.forwardServiceRegistration bool true
LSR31.tn.forwardProtocolRegistration bool true
LSR31.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR31.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR31.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR31.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR31.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR31.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR31.ipv4.routingTable.routingFile string ""

routing table file name
LSR31.ipv4.natTable.networkProtocolModule string "^.ip"
LSR31.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR31.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR31.ipv4.up.forwardServiceRegistration bool true
LSR31.ipv4.up.forwardProtocolRegistration bool true
LSR31.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR31.ipv4.icmp.routingTableModule string
LSR31.ipv4.icmp.crcMode string "declared"
LSR31.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR31.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR31.ipv4.mp.forwardServiceRegistration bool true
LSR31.ipv4.mp.forwardProtocolRegistration bool true
LSR31.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR31.ipv4.lp.forwardServiceRegistration bool true
LSR31.ipv4.lp.forwardProtocolRegistration bool true
LSR31.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR31.nm.forwardServiceRegistration bool true
LSR31.nm.forwardProtocolRegistration bool true
LSR31.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR31.mpls.libTableModule string
LSR31.libTable.config xml xml("")

table contents to be loaded on startup
LSR31.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR31.ml.forwardServiceRegistration bool true
LSR31.ml.forwardProtocolRegistration bool true
LSR32.status.initialStatus string "UP"

TODO @signal, @statistic
LSR32.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR32.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR32.ted.routingTableModule string
LSR32.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR32.linkStateRouting.routingTableModule string
LSR32.linkStateRouting.tedModule string
LSR32.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR32.rsvp.routingTableModule string
LSR32.rsvp.libTableModule string
LSR32.rsvp.tedModule string
LSR32.rsvp.traffic xml xml("")

specifies paths to set up
LSR32.rsvp.helloInterval double
LSR32.rsvp.helloTimeout double
LSR32.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR32.tn.forwardServiceRegistration bool true
LSR32.tn.forwardProtocolRegistration bool true
LSR32.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR32.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR32.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR32.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR32.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR32.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR32.ipv4.routingTable.routingFile string ""

routing table file name
LSR32.ipv4.natTable.networkProtocolModule string "^.ip"
LSR32.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR32.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR32.ipv4.up.forwardServiceRegistration bool true
LSR32.ipv4.up.forwardProtocolRegistration bool true
LSR32.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR32.ipv4.icmp.routingTableModule string
LSR32.ipv4.icmp.crcMode string "declared"
LSR32.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR32.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR32.ipv4.mp.forwardServiceRegistration bool true
LSR32.ipv4.mp.forwardProtocolRegistration bool true
LSR32.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR32.ipv4.lp.forwardServiceRegistration bool true
LSR32.ipv4.lp.forwardProtocolRegistration bool true
LSR32.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR32.nm.forwardServiceRegistration bool true
LSR32.nm.forwardProtocolRegistration bool true
LSR32.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR32.mpls.libTableModule string
LSR32.libTable.config xml xml("")

table contents to be loaded on startup
LSR32.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR32.ml.forwardServiceRegistration bool true
LSR32.ml.forwardProtocolRegistration bool true
LSR33.status.initialStatus string "UP"

TODO @signal, @statistic
LSR33.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR33.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR33.ted.routingTableModule string
LSR33.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR33.linkStateRouting.routingTableModule string
LSR33.linkStateRouting.tedModule string
LSR33.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR33.rsvp.routingTableModule string
LSR33.rsvp.libTableModule string
LSR33.rsvp.tedModule string
LSR33.rsvp.traffic xml xml("")

specifies paths to set up
LSR33.rsvp.helloInterval double
LSR33.rsvp.helloTimeout double
LSR33.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR33.tn.forwardServiceRegistration bool true
LSR33.tn.forwardProtocolRegistration bool true
LSR33.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR33.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR33.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR33.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR33.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR33.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR33.ipv4.routingTable.routingFile string ""

routing table file name
LSR33.ipv4.natTable.networkProtocolModule string "^.ip"
LSR33.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR33.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR33.ipv4.up.forwardServiceRegistration bool true
LSR33.ipv4.up.forwardProtocolRegistration bool true
LSR33.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR33.ipv4.icmp.routingTableModule string
LSR33.ipv4.icmp.crcMode string "declared"
LSR33.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR33.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR33.ipv4.mp.forwardServiceRegistration bool true
LSR33.ipv4.mp.forwardProtocolRegistration bool true
LSR33.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR33.ipv4.lp.forwardServiceRegistration bool true
LSR33.ipv4.lp.forwardProtocolRegistration bool true
LSR33.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR33.nm.forwardServiceRegistration bool true
LSR33.nm.forwardProtocolRegistration bool true
LSR33.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR33.mpls.libTableModule string
LSR33.libTable.config xml xml("")

table contents to be loaded on startup
LSR33.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR33.ml.forwardServiceRegistration bool true
LSR33.ml.forwardProtocolRegistration bool true
LSR34.status.initialStatus string "UP"

TODO @signal, @statistic
LSR34.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR34.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR34.ted.routingTableModule string
LSR34.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR34.linkStateRouting.routingTableModule string
LSR34.linkStateRouting.tedModule string
LSR34.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR34.rsvp.routingTableModule string
LSR34.rsvp.libTableModule string
LSR34.rsvp.tedModule string
LSR34.rsvp.traffic xml xml("")

specifies paths to set up
LSR34.rsvp.helloInterval double
LSR34.rsvp.helloTimeout double
LSR34.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR34.tn.forwardServiceRegistration bool true
LSR34.tn.forwardProtocolRegistration bool true
LSR34.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR34.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR34.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR34.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR34.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR34.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR34.ipv4.routingTable.routingFile string ""

routing table file name
LSR34.ipv4.natTable.networkProtocolModule string "^.ip"
LSR34.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR34.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR34.ipv4.up.forwardServiceRegistration bool true
LSR34.ipv4.up.forwardProtocolRegistration bool true
LSR34.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR34.ipv4.icmp.routingTableModule string
LSR34.ipv4.icmp.crcMode string "declared"
LSR34.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR34.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR34.ipv4.mp.forwardServiceRegistration bool true
LSR34.ipv4.mp.forwardProtocolRegistration bool true
LSR34.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR34.ipv4.lp.forwardServiceRegistration bool true
LSR34.ipv4.lp.forwardProtocolRegistration bool true
LSR34.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR34.nm.forwardServiceRegistration bool true
LSR34.nm.forwardProtocolRegistration bool true
LSR34.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR34.mpls.libTableModule string
LSR34.libTable.config xml xml("")

table contents to be loaded on startup
LSR34.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR34.ml.forwardServiceRegistration bool true
LSR34.ml.forwardProtocolRegistration bool true
LSR35.status.initialStatus string "UP"

TODO @signal, @statistic
LSR35.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR35.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR35.ted.routingTableModule string
LSR35.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR35.linkStateRouting.routingTableModule string
LSR35.linkStateRouting.tedModule string
LSR35.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR35.rsvp.routingTableModule string
LSR35.rsvp.libTableModule string
LSR35.rsvp.tedModule string
LSR35.rsvp.traffic xml xml("")

specifies paths to set up
LSR35.rsvp.helloInterval double
LSR35.rsvp.helloTimeout double
LSR35.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR35.tn.forwardServiceRegistration bool true
LSR35.tn.forwardProtocolRegistration bool true
LSR35.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR35.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR35.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR35.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR35.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR35.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR35.ipv4.routingTable.routingFile string ""

routing table file name
LSR35.ipv4.natTable.networkProtocolModule string "^.ip"
LSR35.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR35.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR35.ipv4.up.forwardServiceRegistration bool true
LSR35.ipv4.up.forwardProtocolRegistration bool true
LSR35.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR35.ipv4.icmp.routingTableModule string
LSR35.ipv4.icmp.crcMode string "declared"
LSR35.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR35.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR35.ipv4.mp.forwardServiceRegistration bool true
LSR35.ipv4.mp.forwardProtocolRegistration bool true
LSR35.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR35.ipv4.lp.forwardServiceRegistration bool true
LSR35.ipv4.lp.forwardProtocolRegistration bool true
LSR35.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR35.nm.forwardServiceRegistration bool true
LSR35.nm.forwardProtocolRegistration bool true
LSR35.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR35.mpls.libTableModule string
LSR35.libTable.config xml xml("")

table contents to be loaded on startup
LSR35.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR35.ml.forwardServiceRegistration bool true
LSR35.ml.forwardProtocolRegistration bool true
LSR36.status.initialStatus string "UP"

TODO @signal, @statistic
LSR36.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
LSR36.ted.interfaceTableModule string

The path to the InterfaceTable module
LSR36.ted.routingTableModule string
LSR36.linkStateRouting.interfaceTableModule string

The path to the InterfaceTable module
LSR36.linkStateRouting.routingTableModule string
LSR36.linkStateRouting.tedModule string
LSR36.rsvp.interfaceTableModule string

The path to the InterfaceTable module
LSR36.rsvp.routingTableModule string
LSR36.rsvp.libTableModule string
LSR36.rsvp.tedModule string
LSR36.rsvp.traffic xml xml("")

specifies paths to set up
LSR36.rsvp.helloInterval double
LSR36.rsvp.helloTimeout double
LSR36.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR36.tn.forwardServiceRegistration bool true
LSR36.tn.forwardProtocolRegistration bool true
LSR36.ipv4.routingTable.interfaceTableModule string

The path to the InterfaceTable module
LSR36.ipv4.routingTable.routerId string "auto"

for routers, the router id using IPv4 address dotted notation; specify "auto" to select the highest interface address; should be left empty ("") for hosts
LSR36.ipv4.routingTable.netmaskRoutes string "*"

maintain netmask routes for interfaces
LSR36.ipv4.routingTable.forwarding bool true

turns IP forwarding on/off
LSR36.ipv4.routingTable.multicastForwarding bool false

turns multicast forwarding on/off
LSR36.ipv4.routingTable.useAdminDist bool false

Use Cisco like administrative distances
LSR36.ipv4.routingTable.routingFile string ""

routing table file name
LSR36.ipv4.natTable.networkProtocolModule string "^.ip"
LSR36.ipv4.natTable.config xml xml("")

XML configuration parameters for network address translation
LSR36.ipv4.up.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR36.ipv4.up.forwardServiceRegistration bool true
LSR36.ipv4.up.forwardProtocolRegistration bool true
LSR36.ipv4.icmp.interfaceTableModule string

The path to the InterfaceTable module
LSR36.ipv4.icmp.routingTableModule string
LSR36.ipv4.icmp.crcMode string "declared"
LSR36.ipv4.icmp.quoteLength int 8B

Number of bytes from original packet to quote in ICMP reply
LSR36.ipv4.mp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR36.ipv4.mp.forwardServiceRegistration bool true
LSR36.ipv4.mp.forwardProtocolRegistration bool true
LSR36.ipv4.lp.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR36.ipv4.lp.forwardServiceRegistration bool true
LSR36.ipv4.lp.forwardProtocolRegistration bool true
LSR36.nm.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR36.nm.forwardServiceRegistration bool true
LSR36.nm.forwardProtocolRegistration bool true
LSR36.mpls.interfaceTableModule string

The path to the InterfaceTable module
LSR36.mpls.libTableModule string
LSR36.libTable.config xml xml("")

table contents to be loaded on startup
LSR36.ml.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
LSR36.ml.forwardServiceRegistration bool true
LSR36.ml.forwardProtocolRegistration bool true
host1.status.initialStatus string "UP"

TODO @signal, @statistic
host1.pcapRecorder.verbose bool true

whether to log packets on the module output
host1.pcapRecorder.pcapFile string ""

the PCAP file to be written
host1.pcapRecorder.fileFormat string "pcapng"
host1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
host1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
host1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
host1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
host1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.cb.forwardServiceRegistration bool true
host1.cb.forwardProtocolRegistration bool true
host1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.bl.forwardServiceRegistration bool true
host1.bl.forwardProtocolRegistration bool true
host1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.li.forwardServiceRegistration bool true
host1.li.forwardProtocolRegistration bool true
host1.eth.bitrate double
host1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.nl.forwardServiceRegistration bool true
host1.nl.forwardProtocolRegistration bool true
host1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.tn.forwardServiceRegistration bool true
host1.tn.forwardProtocolRegistration bool true
host1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host1.at.forwardServiceRegistration bool true
host1.at.forwardProtocolRegistration bool true
host2.status.initialStatus string "UP"

TODO @signal, @statistic
host2.pcapRecorder.verbose bool true

whether to log packets on the module output
host2.pcapRecorder.pcapFile string ""

the PCAP file to be written
host2.pcapRecorder.fileFormat string "pcapng"
host2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
host2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
host2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
host2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
host2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
host2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
host2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
host2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
host2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
host2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
host2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
host2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.cb.forwardServiceRegistration bool true
host2.cb.forwardProtocolRegistration bool true
host2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.bl.forwardServiceRegistration bool true
host2.bl.forwardProtocolRegistration bool true
host2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.li.forwardServiceRegistration bool true
host2.li.forwardProtocolRegistration bool true
host2.eth.bitrate double
host2.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.nl.forwardServiceRegistration bool true
host2.nl.forwardProtocolRegistration bool true
host2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.tn.forwardServiceRegistration bool true
host2.tn.forwardProtocolRegistration bool true
host2.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
host2.at.forwardServiceRegistration bool true
host2.at.forwardProtocolRegistration bool true

Source code

network R37
{
    types:
        channel line extends ThruputMeteringChannel
        {
            delay = 15ms;
            datarate = 128kbps;
            thruputDisplayFormat = "u";
        }
    submodules:
        configurator: Ipv4NetworkConfigurator {
            parameters:
                @display("p=100,100;is=s");
        }
        LSR0: RsvpMplsRouter {
            parameters:
        }
        LSR1: RsvpMplsRouter {
            parameters:
        }
        LSR2: RsvpMplsRouter {
            parameters:
        }
        LSR3: RsvpMplsRouter {
            parameters:
        }
        LSR4: RsvpMplsRouter {
            parameters:
        }
        LSR5: RsvpMplsRouter {
            parameters:
        }
        LSR6: RsvpMplsRouter {
            parameters:
        }
        LSR7: RsvpMplsRouter {
            parameters:
        }
        LSR8: RsvpMplsRouter {
            parameters:
        }
        LSR9: RsvpMplsRouter {
            parameters:
        }
        LSR10: RsvpMplsRouter {
            parameters:
        }
        LSR11: RsvpMplsRouter {
            parameters:
        }
        LSR12: RsvpMplsRouter {
            parameters:
        }
        LSR13: RsvpMplsRouter {
            parameters:
        }
        LSR14: RsvpMplsRouter {
            parameters:
        }
        LSR15: RsvpMplsRouter {
            parameters:
        }
        LSR16: RsvpMplsRouter {
            parameters:
        }
        LSR17: RsvpMplsRouter {
            parameters:
        }
        LSR18: RsvpMplsRouter {
            parameters:
        }
        LSR19: RsvpMplsRouter {
            parameters:
        }
        LSR20: RsvpMplsRouter {
            parameters:
        }
        LSR21: RsvpMplsRouter {
            parameters:
        }
        LSR22: RsvpMplsRouter {
            parameters:
        }
        LSR23: RsvpMplsRouter {
            parameters:
        }
        LSR24: RsvpMplsRouter {
            parameters:
        }
        LSR25: RsvpMplsRouter {
            parameters:
        }
        LSR26: RsvpMplsRouter {
            parameters:
        }
        LSR27: RsvpMplsRouter {
            parameters:
        }
        LSR28: RsvpMplsRouter {
            parameters:
        }
        LSR29: RsvpMplsRouter {
            parameters:
        }
        LSR30: RsvpMplsRouter {
            parameters:
        }
        LSR31: RsvpMplsRouter {
            parameters:
        }
        LSR32: RsvpMplsRouter {
            parameters:
        }
        LSR33: RsvpMplsRouter {
            parameters:
        }
        LSR34: RsvpMplsRouter {
            parameters:
        }
        LSR35: RsvpMplsRouter {
            parameters:
        }
        LSR36: RsvpMplsRouter {
            parameters:
        }
        host1: StandardHost {
            parameters:
                @display("i=device/laptop");
        }
        host2: StandardHost {
            parameters:
                @display("i=device/laptop");

        }
    connections:
        LSR7.pppg++ <--> line <--> LSR0.pppg++;   // cost 259
        LSR8.pppg++ <--> line <--> LSR3.pppg++;   // cost 474
        LSR9.pppg++ <--> line <--> LSR4.pppg++;   // cost 540
        LSR11.pppg++ <--> line <--> LSR7.pppg++;  // cost 264
        LSR12.pppg++ <--> line <--> LSR11.pppg++; // cost 275
        LSR13.pppg++ <--> line <--> LSR0.pppg++;  // cost 1067
        LSR13.pppg++ <--> line <--> LSR5.pppg++;  // cost 610
        LSR13.pppg++ <--> line <--> LSR10.pppg++; // cost 462
        LSR14.pppg++ <--> line <--> LSR0.pppg++;  // cost 552
        LSR14.pppg++ <--> line <--> LSR4.pppg++;  // cost 381
        LSR14.pppg++ <--> line <--> LSR12.pppg++; // cost 592
        LSR16.pppg++ <--> line <--> LSR8.pppg++;  // cost 436
        LSR18.pppg++ <--> line <--> LSR0.pppg++;  // cost 540
        LSR18.pppg++ <--> line <--> LSR5.pppg++;  // cost 239
        LSR18.pppg++ <--> line <--> LSR10.pppg++; // cost 690
        LSR18.pppg++ <--> line <--> LSR17.pppg++; // cost 1977
        LSR20.pppg++ <--> line <--> LSR2.pppg++;  // cost 760
        LSR20.pppg++ <--> line <--> LSR6.pppg++;  // cost 834
        LSR20.pppg++ <--> line <--> LSR17.pppg++; // cost 751
        LSR21.pppg++ <--> line <--> LSR2.pppg++;  // cost 508
        LSR21.pppg++ <--> line <--> LSR6.pppg++;  // cost 756
        LSR21.pppg++ <--> line <--> LSR19.pppg++; // cost 411
        LSR23.pppg++ <--> line <--> LSR4.pppg++;  // cost 757
        LSR23.pppg++ <--> line <--> LSR12.pppg++; // cost 456
        LSR23.pppg++ <--> line <--> LSR22.pppg++; // cost 522
        LSR24.pppg++ <--> line <--> LSR9.pppg++;  // cost 722
        LSR24.pppg++ <--> line <--> LSR15.pppg++; // cost 1182
        LSR25.pppg++ <--> line <--> LSR1.pppg++;  // cost 1363
        LSR26.pppg++ <--> line <--> LSR6.pppg++;  // cost 747
        LSR26.pppg++ <--> line <--> LSR7.pppg++;  // cost 393
        LSR26.pppg++ <--> line <--> LSR18.pppg++; // cost 514
        LSR26.pppg++ <--> line <--> LSR19.pppg++; // cost 594
        LSR27.pppg++ <--> line <--> LSR4.pppg++;  // cost 420
        LSR27.pppg++ <--> line <--> LSR8.pppg++;  // cost 668
        LSR28.pppg++ <--> line <--> LSR21.pppg++; // cost 907
        LSR28.pppg++ <--> line <--> LSR22.pppg++; // cost 720
        LSR28.pppg++ <--> line <--> LSR25.pppg++; // cost 638
        LSR29.pppg++ <--> line <--> LSR2.pppg++;  // cost 1244
        LSR29.pppg++ <--> line <--> LSR17.pppg++; // cost 471
        LSR30.pppg++ <--> line <--> LSR1.pppg++;  // cost 794
        LSR30.pppg++ <--> line <--> LSR3.pppg++;  // cost 487
        LSR31.pppg++ <--> line <--> LSR9.pppg++;  // cost 777
        LSR31.pppg++ <--> line <--> LSR15.pppg++; // cost 597
        LSR32.pppg++ <--> line <--> LSR12.pppg++; // cost 271
        LSR32.pppg++ <--> line <--> LSR26.pppg++; // cost 600
        LSR33.pppg++ <--> line <--> LSR23.pppg++; // cost 534
        LSR33.pppg++ <--> line <--> LSR27.pppg++; // cost 376
        LSR34.pppg++ <--> line <--> LSR4.pppg++;  // cost 775
        LSR34.pppg++ <--> line <--> LSR15.pppg++; // cost 1370
        LSR34.pppg++ <--> line <--> LSR16.pppg++; // cost 383
        LSR35.pppg++ <--> line <--> LSR1.pppg++;  // cost 1500
        LSR35.pppg++ <--> line <--> LSR3.pppg++;  // cost 551
        LSR35.pppg++ <--> line <--> LSR28.pppg++; // cost 783
        LSR35.pppg++ <--> line <--> LSR33.pppg++; // cost 400
        LSR36.pppg++ <--> line <--> LSR19.pppg++; // cost 507
        LSR36.pppg++ <--> line <--> LSR22.pppg++; // cost 327
        LSR36.pppg++ <--> line <--> LSR32.pppg++; // cost 218

        host1.pppg++ <--> line <--> LSR2.pppg++;
        host2.pppg++ <--> line <--> LSR34.pppg++;

}
File: examples/mpls/net37/r37.ned

This documentation is released under the Creative Commons license