BgpNetwork

Package: inet.examples.bgpv4.BgpAndOspf

BgpNetwork

network

(no description)

IntegratedCanvasVisualizer Ipv4NetworkConfigurator BgpRouter BgpRouter OspfRouter OspfRouter OspfRouter OspfRouter EthernetSwitch EthernetSwitch EthernetSwitch EthernetSwitch StandardHost StandardHost StandardHost StandardHost StandardHost StandardHost StandardHost StandardHost

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addDirectRoutes bool true

add direct routes (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
A.status.initialStatus string "UP"

TODO @signal, @statistic
A.pcapRecorder.verbose bool true

whether to log packets on the module output
A.pcapRecorder.pcapFile string ""

the PCAP file to be written
A.pcapRecorder.fileFormat string "pcapng"
A.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
A.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
A.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
A.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
A.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
A.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
A.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
A.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
A.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
A.pcapRecorder.displayStringTextFormat string "rec: %n pks"
A.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
A.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A.cb.forwardServiceRegistration bool true
A.cb.forwardProtocolRegistration bool true
A.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A.bl.forwardServiceRegistration bool true
A.bl.forwardProtocolRegistration bool true
A.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A.li.forwardServiceRegistration bool true
A.li.forwardProtocolRegistration bool true
A.eth.bitrate double
A.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A.nl.forwardServiceRegistration bool true
A.nl.forwardProtocolRegistration bool true
A.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A.tn.forwardServiceRegistration bool true
A.tn.forwardProtocolRegistration bool true
A.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A.at.forwardServiceRegistration bool true
A.at.forwardProtocolRegistration bool true
A.bgp.interfaceTableModule string

The path to the InterfaceTable module
A.bgp.routingTableModule string
A.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
B.status.initialStatus string "UP"

TODO @signal, @statistic
B.pcapRecorder.verbose bool true

whether to log packets on the module output
B.pcapRecorder.pcapFile string ""

the PCAP file to be written
B.pcapRecorder.fileFormat string "pcapng"
B.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
B.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
B.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
B.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
B.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
B.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
B.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
B.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
B.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
B.pcapRecorder.displayStringTextFormat string "rec: %n pks"
B.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
B.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.cb.forwardServiceRegistration bool true
B.cb.forwardProtocolRegistration bool true
B.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.bl.forwardServiceRegistration bool true
B.bl.forwardProtocolRegistration bool true
B.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.li.forwardServiceRegistration bool true
B.li.forwardProtocolRegistration bool true
B.eth.bitrate double
B.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.nl.forwardServiceRegistration bool true
B.nl.forwardProtocolRegistration bool true
B.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.tn.forwardServiceRegistration bool true
B.tn.forwardProtocolRegistration bool true
B.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.at.forwardServiceRegistration bool true
B.at.forwardProtocolRegistration bool true
B.bgp.interfaceTableModule string

The path to the InterfaceTable module
B.bgp.routingTableModule string
B.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RA1.status.initialStatus string "UP"

TODO @signal, @statistic
RA1.pcapRecorder.verbose bool true

whether to log packets on the module output
RA1.pcapRecorder.pcapFile string ""

the PCAP file to be written
RA1.pcapRecorder.fileFormat string "pcapng"
RA1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RA1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RA1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RA1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RA1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RA1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RA1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RA1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RA1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RA1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RA1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RA1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.cb.forwardServiceRegistration bool true
RA1.cb.forwardProtocolRegistration bool true
RA1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.bl.forwardServiceRegistration bool true
RA1.bl.forwardProtocolRegistration bool true
RA1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.li.forwardServiceRegistration bool true
RA1.li.forwardProtocolRegistration bool true
RA1.eth.bitrate double
RA1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.nl.forwardServiceRegistration bool true
RA1.nl.forwardProtocolRegistration bool true
RA1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.tn.forwardServiceRegistration bool true
RA1.tn.forwardProtocolRegistration bool true
RA1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.at.forwardServiceRegistration bool true
RA1.at.forwardProtocolRegistration bool true
RA1.bgp.interfaceTableModule string

The path to the InterfaceTable module
RA1.bgp.routingTableModule string
RA1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RA2.status.initialStatus string "UP"

TODO @signal, @statistic
RA2.pcapRecorder.verbose bool true

whether to log packets on the module output
RA2.pcapRecorder.pcapFile string ""

the PCAP file to be written
RA2.pcapRecorder.fileFormat string "pcapng"
RA2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RA2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RA2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RA2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RA2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RA2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RA2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RA2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RA2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RA2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RA2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RA2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.cb.forwardServiceRegistration bool true
RA2.cb.forwardProtocolRegistration bool true
RA2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.bl.forwardServiceRegistration bool true
RA2.bl.forwardProtocolRegistration bool true
RA2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.li.forwardServiceRegistration bool true
RA2.li.forwardProtocolRegistration bool true
RA2.eth.bitrate double
RA2.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.nl.forwardServiceRegistration bool true
RA2.nl.forwardProtocolRegistration bool true
RA2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.tn.forwardServiceRegistration bool true
RA2.tn.forwardProtocolRegistration bool true
RA2.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.at.forwardServiceRegistration bool true
RA2.at.forwardProtocolRegistration bool true
RA2.bgp.interfaceTableModule string

The path to the InterfaceTable module
RA2.bgp.routingTableModule string
RA2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RB1.status.initialStatus string "UP"

TODO @signal, @statistic
RB1.pcapRecorder.verbose bool true

whether to log packets on the module output
RB1.pcapRecorder.pcapFile string ""

the PCAP file to be written
RB1.pcapRecorder.fileFormat string "pcapng"
RB1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RB1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RB1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RB1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RB1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RB1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RB1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RB1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RB1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RB1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RB1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RB1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.cb.forwardServiceRegistration bool true
RB1.cb.forwardProtocolRegistration bool true
RB1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.bl.forwardServiceRegistration bool true
RB1.bl.forwardProtocolRegistration bool true
RB1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.li.forwardServiceRegistration bool true
RB1.li.forwardProtocolRegistration bool true
RB1.eth.bitrate double
RB1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.nl.forwardServiceRegistration bool true
RB1.nl.forwardProtocolRegistration bool true
RB1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.tn.forwardServiceRegistration bool true
RB1.tn.forwardProtocolRegistration bool true
RB1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.at.forwardServiceRegistration bool true
RB1.at.forwardProtocolRegistration bool true
RB1.bgp.interfaceTableModule string

The path to the InterfaceTable module
RB1.bgp.routingTableModule string
RB1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RB2.status.initialStatus string "UP"

TODO @signal, @statistic
RB2.pcapRecorder.verbose bool true

whether to log packets on the module output
RB2.pcapRecorder.pcapFile string ""

the PCAP file to be written
RB2.pcapRecorder.fileFormat string "pcapng"
RB2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RB2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RB2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RB2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RB2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RB2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RB2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RB2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RB2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RB2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RB2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RB2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB2.cb.forwardServiceRegistration bool true
RB2.cb.forwardProtocolRegistration bool true
RB2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB2.bl.forwardServiceRegistration bool true
RB2.bl.forwardProtocolRegistration bool true
RB2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB2.li.forwardServiceRegistration bool true
RB2.li.forwardProtocolRegistration bool true
RB2.eth.bitrate double
RB2.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB2.nl.forwardServiceRegistration bool true
RB2.nl.forwardProtocolRegistration bool true
RB2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB2.tn.forwardServiceRegistration bool true
RB2.tn.forwardProtocolRegistration bool true
RB2.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB2.at.forwardServiceRegistration bool true
RB2.at.forwardProtocolRegistration bool true
RB2.bgp.interfaceTableModule string

The path to the InterfaceTable module
RB2.bgp.routingTableModule string
RB2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
PA1.macTable.agingTime double
PA1.macTable.forwardingTableFile string
PA1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PA1.l2NodeConfigurator.interfaceTableModule string
PA1.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PA1.status.initialStatus string "UP"

TODO @signal, @statistic
PA1.pcapRecorder.verbose bool true

whether to log packets on the module output
PA1.pcapRecorder.pcapFile string ""

the PCAP file to be written
PA1.pcapRecorder.fileFormat string "pcapng"
PA1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PA1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PA1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PA1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PA1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PA1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PA1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PA1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PA1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PA1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PA1.stp.helloTime double
PA1.stp.forwardDelay double
PA1.stp.maxAge double
PA1.stp.bridgePriority int
PA1.stp.visualize bool
PA1.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA1.sc.forwardServiceRegistration bool true
PA1.sc.forwardProtocolRegistration bool true
PA1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA1.cb.forwardServiceRegistration bool true
PA1.cb.forwardProtocolRegistration bool true
PA1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA1.bl.forwardServiceRegistration bool true
PA1.bl.forwardProtocolRegistration bool true
PA1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA1.li.forwardServiceRegistration bool true
PA1.li.forwardProtocolRegistration bool true
PA1.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA1.cutthrough.forwardServiceRegistration bool true
PA1.cutthrough.forwardProtocolRegistration bool true
PA1.eth.bitrate double
PA2.macTable.agingTime double
PA2.macTable.forwardingTableFile string
PA2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PA2.l2NodeConfigurator.interfaceTableModule string
PA2.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PA2.status.initialStatus string "UP"

TODO @signal, @statistic
PA2.pcapRecorder.verbose bool true

whether to log packets on the module output
PA2.pcapRecorder.pcapFile string ""

the PCAP file to be written
PA2.pcapRecorder.fileFormat string "pcapng"
PA2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PA2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PA2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PA2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PA2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PA2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PA2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PA2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PA2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PA2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PA2.stp.helloTime double
PA2.stp.forwardDelay double
PA2.stp.maxAge double
PA2.stp.bridgePriority int
PA2.stp.visualize bool
PA2.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA2.sc.forwardServiceRegistration bool true
PA2.sc.forwardProtocolRegistration bool true
PA2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA2.cb.forwardServiceRegistration bool true
PA2.cb.forwardProtocolRegistration bool true
PA2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA2.bl.forwardServiceRegistration bool true
PA2.bl.forwardProtocolRegistration bool true
PA2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA2.li.forwardServiceRegistration bool true
PA2.li.forwardProtocolRegistration bool true
PA2.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA2.cutthrough.forwardServiceRegistration bool true
PA2.cutthrough.forwardProtocolRegistration bool true
PA2.eth.bitrate double
PB1.macTable.agingTime double
PB1.macTable.forwardingTableFile string
PB1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PB1.l2NodeConfigurator.interfaceTableModule string
PB1.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PB1.status.initialStatus string "UP"

TODO @signal, @statistic
PB1.pcapRecorder.verbose bool true

whether to log packets on the module output
PB1.pcapRecorder.pcapFile string ""

the PCAP file to be written
PB1.pcapRecorder.fileFormat string "pcapng"
PB1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PB1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PB1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PB1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PB1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PB1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PB1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PB1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PB1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PB1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PB1.stp.helloTime double
PB1.stp.forwardDelay double
PB1.stp.maxAge double
PB1.stp.bridgePriority int
PB1.stp.visualize bool
PB1.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.sc.forwardServiceRegistration bool true
PB1.sc.forwardProtocolRegistration bool true
PB1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.cb.forwardServiceRegistration bool true
PB1.cb.forwardProtocolRegistration bool true
PB1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.bl.forwardServiceRegistration bool true
PB1.bl.forwardProtocolRegistration bool true
PB1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.li.forwardServiceRegistration bool true
PB1.li.forwardProtocolRegistration bool true
PB1.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.cutthrough.forwardServiceRegistration bool true
PB1.cutthrough.forwardProtocolRegistration bool true
PB1.eth.bitrate double
PB2.macTable.agingTime double
PB2.macTable.forwardingTableFile string
PB2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PB2.l2NodeConfigurator.interfaceTableModule string
PB2.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PB2.status.initialStatus string "UP"

TODO @signal, @statistic
PB2.pcapRecorder.verbose bool true

whether to log packets on the module output
PB2.pcapRecorder.pcapFile string ""

the PCAP file to be written
PB2.pcapRecorder.fileFormat string "pcapng"
PB2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PB2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PB2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PB2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PB2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PB2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PB2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PB2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PB2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PB2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PB2.stp.helloTime double
PB2.stp.forwardDelay double
PB2.stp.maxAge double
PB2.stp.bridgePriority int
PB2.stp.visualize bool
PB2.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB2.sc.forwardServiceRegistration bool true
PB2.sc.forwardProtocolRegistration bool true
PB2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB2.cb.forwardServiceRegistration bool true
PB2.cb.forwardProtocolRegistration bool true
PB2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB2.bl.forwardServiceRegistration bool true
PB2.bl.forwardProtocolRegistration bool true
PB2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB2.li.forwardServiceRegistration bool true
PB2.li.forwardProtocolRegistration bool true
PB2.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB2.cutthrough.forwardServiceRegistration bool true
PB2.cutthrough.forwardProtocolRegistration bool true
PB2.eth.bitrate double
HA11.status.initialStatus string "UP"

TODO @signal, @statistic
HA11.pcapRecorder.verbose bool true

whether to log packets on the module output
HA11.pcapRecorder.pcapFile string ""

the PCAP file to be written
HA11.pcapRecorder.fileFormat string "pcapng"
HA11.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HA11.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HA11.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HA11.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HA11.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HA11.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HA11.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HA11.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HA11.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HA11.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HA11.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HA11.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA11.cb.forwardServiceRegistration bool true
HA11.cb.forwardProtocolRegistration bool true
HA11.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA11.bl.forwardServiceRegistration bool true
HA11.bl.forwardProtocolRegistration bool true
HA11.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA11.li.forwardServiceRegistration bool true
HA11.li.forwardProtocolRegistration bool true
HA11.eth.bitrate double
HA11.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA11.nl.forwardServiceRegistration bool true
HA11.nl.forwardProtocolRegistration bool true
HA11.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA11.tn.forwardServiceRegistration bool true
HA11.tn.forwardProtocolRegistration bool true
HA11.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA11.at.forwardServiceRegistration bool true
HA11.at.forwardProtocolRegistration bool true
HA12.status.initialStatus string "UP"

TODO @signal, @statistic
HA12.pcapRecorder.verbose bool true

whether to log packets on the module output
HA12.pcapRecorder.pcapFile string ""

the PCAP file to be written
HA12.pcapRecorder.fileFormat string "pcapng"
HA12.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HA12.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HA12.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HA12.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HA12.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HA12.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HA12.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HA12.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HA12.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HA12.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HA12.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HA12.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA12.cb.forwardServiceRegistration bool true
HA12.cb.forwardProtocolRegistration bool true
HA12.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA12.bl.forwardServiceRegistration bool true
HA12.bl.forwardProtocolRegistration bool true
HA12.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA12.li.forwardServiceRegistration bool true
HA12.li.forwardProtocolRegistration bool true
HA12.eth.bitrate double
HA12.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA12.nl.forwardServiceRegistration bool true
HA12.nl.forwardProtocolRegistration bool true
HA12.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA12.tn.forwardServiceRegistration bool true
HA12.tn.forwardProtocolRegistration bool true
HA12.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA12.at.forwardServiceRegistration bool true
HA12.at.forwardProtocolRegistration bool true
HA21.status.initialStatus string "UP"

TODO @signal, @statistic
HA21.pcapRecorder.verbose bool true

whether to log packets on the module output
HA21.pcapRecorder.pcapFile string ""

the PCAP file to be written
HA21.pcapRecorder.fileFormat string "pcapng"
HA21.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HA21.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HA21.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HA21.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HA21.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HA21.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HA21.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HA21.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HA21.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HA21.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HA21.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HA21.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA21.cb.forwardServiceRegistration bool true
HA21.cb.forwardProtocolRegistration bool true
HA21.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA21.bl.forwardServiceRegistration bool true
HA21.bl.forwardProtocolRegistration bool true
HA21.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA21.li.forwardServiceRegistration bool true
HA21.li.forwardProtocolRegistration bool true
HA21.eth.bitrate double
HA21.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA21.nl.forwardServiceRegistration bool true
HA21.nl.forwardProtocolRegistration bool true
HA21.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA21.tn.forwardServiceRegistration bool true
HA21.tn.forwardProtocolRegistration bool true
HA21.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA21.at.forwardServiceRegistration bool true
HA21.at.forwardProtocolRegistration bool true
HA22.status.initialStatus string "UP"

TODO @signal, @statistic
HA22.pcapRecorder.verbose bool true

whether to log packets on the module output
HA22.pcapRecorder.pcapFile string ""

the PCAP file to be written
HA22.pcapRecorder.fileFormat string "pcapng"
HA22.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HA22.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HA22.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HA22.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HA22.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HA22.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HA22.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HA22.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HA22.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HA22.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HA22.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HA22.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA22.cb.forwardServiceRegistration bool true
HA22.cb.forwardProtocolRegistration bool true
HA22.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA22.bl.forwardServiceRegistration bool true
HA22.bl.forwardProtocolRegistration bool true
HA22.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA22.li.forwardServiceRegistration bool true
HA22.li.forwardProtocolRegistration bool true
HA22.eth.bitrate double
HA22.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA22.nl.forwardServiceRegistration bool true
HA22.nl.forwardProtocolRegistration bool true
HA22.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA22.tn.forwardServiceRegistration bool true
HA22.tn.forwardProtocolRegistration bool true
HA22.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA22.at.forwardServiceRegistration bool true
HA22.at.forwardProtocolRegistration bool true
HB11.status.initialStatus string "UP"

TODO @signal, @statistic
HB11.pcapRecorder.verbose bool true

whether to log packets on the module output
HB11.pcapRecorder.pcapFile string ""

the PCAP file to be written
HB11.pcapRecorder.fileFormat string "pcapng"
HB11.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HB11.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HB11.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HB11.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HB11.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HB11.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HB11.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HB11.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HB11.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HB11.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HB11.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HB11.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.cb.forwardServiceRegistration bool true
HB11.cb.forwardProtocolRegistration bool true
HB11.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.bl.forwardServiceRegistration bool true
HB11.bl.forwardProtocolRegistration bool true
HB11.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.li.forwardServiceRegistration bool true
HB11.li.forwardProtocolRegistration bool true
HB11.eth.bitrate double
HB11.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.nl.forwardServiceRegistration bool true
HB11.nl.forwardProtocolRegistration bool true
HB11.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.tn.forwardServiceRegistration bool true
HB11.tn.forwardProtocolRegistration bool true
HB11.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.at.forwardServiceRegistration bool true
HB11.at.forwardProtocolRegistration bool true
HB12.status.initialStatus string "UP"

TODO @signal, @statistic
HB12.pcapRecorder.verbose bool true

whether to log packets on the module output
HB12.pcapRecorder.pcapFile string ""

the PCAP file to be written
HB12.pcapRecorder.fileFormat string "pcapng"
HB12.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HB12.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HB12.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HB12.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HB12.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HB12.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HB12.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HB12.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HB12.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HB12.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HB12.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HB12.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.cb.forwardServiceRegistration bool true
HB12.cb.forwardProtocolRegistration bool true
HB12.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.bl.forwardServiceRegistration bool true
HB12.bl.forwardProtocolRegistration bool true
HB12.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.li.forwardServiceRegistration bool true
HB12.li.forwardProtocolRegistration bool true
HB12.eth.bitrate double
HB12.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.nl.forwardServiceRegistration bool true
HB12.nl.forwardProtocolRegistration bool true
HB12.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.tn.forwardServiceRegistration bool true
HB12.tn.forwardProtocolRegistration bool true
HB12.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.at.forwardServiceRegistration bool true
HB12.at.forwardProtocolRegistration bool true
HB21.status.initialStatus string "UP"

TODO @signal, @statistic
HB21.pcapRecorder.verbose bool true

whether to log packets on the module output
HB21.pcapRecorder.pcapFile string ""

the PCAP file to be written
HB21.pcapRecorder.fileFormat string "pcapng"
HB21.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HB21.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HB21.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HB21.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HB21.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HB21.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HB21.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HB21.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HB21.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HB21.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HB21.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HB21.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB21.cb.forwardServiceRegistration bool true
HB21.cb.forwardProtocolRegistration bool true
HB21.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB21.bl.forwardServiceRegistration bool true
HB21.bl.forwardProtocolRegistration bool true
HB21.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB21.li.forwardServiceRegistration bool true
HB21.li.forwardProtocolRegistration bool true
HB21.eth.bitrate double
HB21.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB21.nl.forwardServiceRegistration bool true
HB21.nl.forwardProtocolRegistration bool true
HB21.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB21.tn.forwardServiceRegistration bool true
HB21.tn.forwardProtocolRegistration bool true
HB21.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB21.at.forwardServiceRegistration bool true
HB21.at.forwardProtocolRegistration bool true
HB22.status.initialStatus string "UP"

TODO @signal, @statistic
HB22.pcapRecorder.verbose bool true

whether to log packets on the module output
HB22.pcapRecorder.pcapFile string ""

the PCAP file to be written
HB22.pcapRecorder.fileFormat string "pcapng"
HB22.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HB22.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HB22.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HB22.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HB22.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HB22.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HB22.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HB22.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HB22.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HB22.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HB22.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HB22.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB22.cb.forwardServiceRegistration bool true
HB22.cb.forwardProtocolRegistration bool true
HB22.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB22.bl.forwardServiceRegistration bool true
HB22.bl.forwardProtocolRegistration bool true
HB22.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB22.li.forwardServiceRegistration bool true
HB22.li.forwardProtocolRegistration bool true
HB22.eth.bitrate double
HB22.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB22.nl.forwardServiceRegistration bool true
HB22.nl.forwardProtocolRegistration bool true
HB22.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB22.tn.forwardServiceRegistration bool true
HB22.tn.forwardProtocolRegistration bool true
HB22.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB22.at.forwardServiceRegistration bool true
HB22.at.forwardProtocolRegistration bool true

Source code

network BgpNetwork
{
    types:
        channel LINK_100 extends ThruputMeteringChannel
        {
            parameters:
                delay = 50us;
                datarate = 100Mbps;
                displayAsTooltip = true;
                thruputDisplayFormat = "#N";
        }
    submodules:
        visualizer: IntegratedCanvasVisualizer {
            parameters:
                @display("p=100,100;is=s");
        }
        configurator: Ipv4NetworkConfigurator {
            parameters:
                @display("p=100,200;is=s");
                config = xmldoc("IPv4Config.xml");
                addStaticRoutes = false;
                addDefaultRoutes = false;
                addSubnetRoutes = false;
        }
        A: BgpRouter {
            parameters:
                @display("p=700,230");
            gates:
                pppg[3];
        }
        B: BgpRouter {
            parameters:
                @display("p=850,230");
            gates:
                pppg[3];
        }
        RA1: OspfRouter {
            parameters:
                @display("p=550,130;i=device/router");
            gates:
                pppg[2];
                ethg[1];
        }
        RA2: OspfRouter {
            parameters:
                @display("p=550,330;i=device/router");
            gates:
                pppg[2];
                ethg[1];
        }
        RB1: OspfRouter {
            parameters:
                @display("p=1000,130;i=device/router");
            gates:
                pppg[2];
                ethg[1];
        }
        RB2: OspfRouter {
            parameters:
                @display("p=1000,330;i=device/router");
            gates:
                pppg[2];
                ethg[1];
        }
        PA1: EthernetSwitch {
            parameters:
                @display("p=400,130;i=device/switch");
            gates:
                ethg[3];
        }
        PA2: EthernetSwitch {
            parameters:
                @display("p=400,330;i=device/switch");
            gates:
                ethg[3];
        }
        PB1: EthernetSwitch {
            parameters:
                @display("p=1150,130;i=device/switch");
            gates:
                ethg[3];
        }
        PB2: EthernetSwitch {
            parameters:
                @display("p=1150,330;i=device/switch");
            gates:
                ethg[3];
        }
        HA11: StandardHost {
            parameters:
                @display("p=250,80;i=device/pc");
            gates:
                ethg[1];
        }
        HA12: StandardHost {
            parameters:
                @display("p=250,180;i=device/pc");
            gates:
                ethg[1];
        }
        HA21: StandardHost {
            parameters:
                @display("p=250,280;i=device/pc");
            gates:
                ethg[1];
        }
        HA22: StandardHost {
            parameters:
                @display("p=250,380;i=device/pc");
            gates:
                ethg[1];
        }
        HB11: StandardHost {
            parameters:
                @display("p=1300,80;i=device/pc");
            gates:
                ethg[1];
        }
        HB12: StandardHost {
            parameters:
                @display("p=1300,180;i=device/pc");
            gates:
                ethg[1];
        }
        HB21: StandardHost {
            parameters:
                @display("p=1300,280;i=device/pc");
            gates:
                ethg[1];
        }
        HB22: StandardHost {
            parameters:
                @display("p=1300,380;i=device/pc");
            gates:
                ethg[1];
        }
    connections:
        //LAN A1 et A2
        HA11.ethg[0] <--> LINK_100 <--> PA1.ethg[0];
        HA12.ethg[0] <--> LINK_100 <--> PA1.ethg[1];
        HA21.ethg[0] <--> LINK_100 <--> PA2.ethg[0];
        HA22.ethg[0] <--> LINK_100 <--> PA2.ethg[1];
        PA1.ethg[2] <--> LINK_100 <--> RA1.ethg[0];
        PA2.ethg[2] <--> LINK_100 <--> RA2.ethg[0];

        //OSPF A
        RA1.pppg[1] <--> LINK_100 <--> RA2.pppg[1];
        RA1.pppg[0] <--> LINK_100 <--> A.pppg[1];
        RA2.pppg[0] <--> LINK_100 <--> A.pppg[2];

        //BGP
        A.pppg[0] <--> LINK_100 <--> B.pppg[0];

        //LAN B1 et B2
        HB11.ethg[0] <--> LINK_100 <--> PB1.ethg[0];
        HB12.ethg[0] <--> LINK_100 <--> PB1.ethg[1];
        HB21.ethg[0] <--> LINK_100 <--> PB2.ethg[0];
        HB22.ethg[0] <--> LINK_100 <--> PB2.ethg[1];
        PB1.ethg[2] <--> LINK_100 <--> RB1.ethg[0];
        PB2.ethg[2] <--> LINK_100 <--> RB2.ethg[0];

        //OSPF B
        RB1.pppg[1] <--> LINK_100 <--> RB2.pppg[1];
        RB1.pppg[0] <--> LINK_100 <--> B.pppg[1];
        RB2.pppg[0] <--> LINK_100 <--> B.pppg[2];
}
File: examples/bgpv4/BgpAndOspf/Network.ned

This documentation is released under the Creative Commons license