BgpNetwork

Package: inet.examples.bgpv4.Bgp2RoutersInAS

BgpNetwork

network

(no description)

IntegratedCanvasVisualizer Ipv4NetworkConfigurator BgpRouter BgpRouter BgpRouter BgpRouter OspfRouter OspfRouter OspfRouter OspfRouter OspfRouter OspfRouter EthernetSwitch EthernetSwitch EthernetSwitch EthernetSwitch StandardHost StandardHost StandardHost StandardHost StandardHost StandardHost StandardHost StandardHost

Usage diagram

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram.

Properties

Name Value Description
isNetwork

Unassigned submodule parameters

Name Type Default value Description
configurator.minLinkWeight double 1E-3
configurator.configureIsolatedNetworksSeparatly bool false
configurator.assignAddresses bool true

assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses bool true

avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses bool true

avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addDirectRoutes bool true

add direct routes (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.optimizeRoutes bool true

optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.dumpTopology bool false

print extracted network topology to the module output
configurator.dumpLinks bool false

print recognized network links to the module output
configurator.dumpAddresses bool false

print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes bool false

print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig string ""

write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
A1.status.initialStatus string "UP"

TODO @signal, @statistic
A1.pcapRecorder.verbose bool true

whether to log packets on the module output
A1.pcapRecorder.pcapFile string ""

the PCAP file to be written
A1.pcapRecorder.fileFormat string "pcapng"
A1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
A1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
A1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
A1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
A1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
A1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
A1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
A1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
A1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
A1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
A1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
A1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A1.cb.forwardServiceRegistration bool true
A1.cb.forwardProtocolRegistration bool true
A1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A1.bl.forwardServiceRegistration bool true
A1.bl.forwardProtocolRegistration bool true
A1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A1.li.forwardServiceRegistration bool true
A1.li.forwardProtocolRegistration bool true
A1.eth.bitrate double
A1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A1.nl.forwardServiceRegistration bool true
A1.nl.forwardProtocolRegistration bool true
A1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A1.tn.forwardServiceRegistration bool true
A1.tn.forwardProtocolRegistration bool true
A1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A1.at.forwardServiceRegistration bool true
A1.at.forwardProtocolRegistration bool true
A1.bgp.interfaceTableModule string

The path to the InterfaceTable module
A1.bgp.routingTableModule string
A1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
A2.status.initialStatus string "UP"

TODO @signal, @statistic
A2.pcapRecorder.verbose bool true

whether to log packets on the module output
A2.pcapRecorder.pcapFile string ""

the PCAP file to be written
A2.pcapRecorder.fileFormat string "pcapng"
A2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
A2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
A2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
A2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
A2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
A2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
A2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
A2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
A2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
A2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
A2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
A2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A2.cb.forwardServiceRegistration bool true
A2.cb.forwardProtocolRegistration bool true
A2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A2.bl.forwardServiceRegistration bool true
A2.bl.forwardProtocolRegistration bool true
A2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A2.li.forwardServiceRegistration bool true
A2.li.forwardProtocolRegistration bool true
A2.eth.bitrate double
A2.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A2.nl.forwardServiceRegistration bool true
A2.nl.forwardProtocolRegistration bool true
A2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A2.tn.forwardServiceRegistration bool true
A2.tn.forwardProtocolRegistration bool true
A2.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
A2.at.forwardServiceRegistration bool true
A2.at.forwardProtocolRegistration bool true
A2.bgp.interfaceTableModule string

The path to the InterfaceTable module
A2.bgp.routingTableModule string
A2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
B.status.initialStatus string "UP"

TODO @signal, @statistic
B.pcapRecorder.verbose bool true

whether to log packets on the module output
B.pcapRecorder.pcapFile string ""

the PCAP file to be written
B.pcapRecorder.fileFormat string "pcapng"
B.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
B.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
B.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
B.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
B.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
B.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
B.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
B.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
B.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
B.pcapRecorder.displayStringTextFormat string "rec: %n pks"
B.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
B.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.cb.forwardServiceRegistration bool true
B.cb.forwardProtocolRegistration bool true
B.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.bl.forwardServiceRegistration bool true
B.bl.forwardProtocolRegistration bool true
B.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.li.forwardServiceRegistration bool true
B.li.forwardProtocolRegistration bool true
B.eth.bitrate double
B.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.nl.forwardServiceRegistration bool true
B.nl.forwardProtocolRegistration bool true
B.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.tn.forwardServiceRegistration bool true
B.tn.forwardProtocolRegistration bool true
B.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
B.at.forwardServiceRegistration bool true
B.at.forwardProtocolRegistration bool true
B.bgp.interfaceTableModule string

The path to the InterfaceTable module
B.bgp.routingTableModule string
B.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
C.status.initialStatus string "UP"

TODO @signal, @statistic
C.pcapRecorder.verbose bool true

whether to log packets on the module output
C.pcapRecorder.pcapFile string ""

the PCAP file to be written
C.pcapRecorder.fileFormat string "pcapng"
C.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
C.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
C.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
C.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
C.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
C.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
C.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
C.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
C.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
C.pcapRecorder.displayStringTextFormat string "rec: %n pks"
C.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
C.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
C.cb.forwardServiceRegistration bool true
C.cb.forwardProtocolRegistration bool true
C.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
C.bl.forwardServiceRegistration bool true
C.bl.forwardProtocolRegistration bool true
C.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
C.li.forwardServiceRegistration bool true
C.li.forwardProtocolRegistration bool true
C.eth.bitrate double
C.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
C.nl.forwardServiceRegistration bool true
C.nl.forwardProtocolRegistration bool true
C.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
C.tn.forwardServiceRegistration bool true
C.tn.forwardProtocolRegistration bool true
C.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
C.at.forwardServiceRegistration bool true
C.at.forwardProtocolRegistration bool true
C.bgp.interfaceTableModule string

The path to the InterfaceTable module
C.bgp.routingTableModule string
C.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RA1.status.initialStatus string "UP"

TODO @signal, @statistic
RA1.pcapRecorder.verbose bool true

whether to log packets on the module output
RA1.pcapRecorder.pcapFile string ""

the PCAP file to be written
RA1.pcapRecorder.fileFormat string "pcapng"
RA1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RA1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RA1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RA1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RA1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RA1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RA1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RA1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RA1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RA1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RA1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RA1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.cb.forwardServiceRegistration bool true
RA1.cb.forwardProtocolRegistration bool true
RA1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.bl.forwardServiceRegistration bool true
RA1.bl.forwardProtocolRegistration bool true
RA1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.li.forwardServiceRegistration bool true
RA1.li.forwardProtocolRegistration bool true
RA1.eth.bitrate double
RA1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.nl.forwardServiceRegistration bool true
RA1.nl.forwardProtocolRegistration bool true
RA1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.tn.forwardServiceRegistration bool true
RA1.tn.forwardProtocolRegistration bool true
RA1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA1.at.forwardServiceRegistration bool true
RA1.at.forwardProtocolRegistration bool true
RA1.bgp.interfaceTableModule string

The path to the InterfaceTable module
RA1.bgp.routingTableModule string
RA1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RA2.status.initialStatus string "UP"

TODO @signal, @statistic
RA2.pcapRecorder.verbose bool true

whether to log packets on the module output
RA2.pcapRecorder.pcapFile string ""

the PCAP file to be written
RA2.pcapRecorder.fileFormat string "pcapng"
RA2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RA2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RA2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RA2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RA2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RA2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RA2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RA2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RA2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RA2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RA2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RA2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.cb.forwardServiceRegistration bool true
RA2.cb.forwardProtocolRegistration bool true
RA2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.bl.forwardServiceRegistration bool true
RA2.bl.forwardProtocolRegistration bool true
RA2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.li.forwardServiceRegistration bool true
RA2.li.forwardProtocolRegistration bool true
RA2.eth.bitrate double
RA2.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.nl.forwardServiceRegistration bool true
RA2.nl.forwardProtocolRegistration bool true
RA2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.tn.forwardServiceRegistration bool true
RA2.tn.forwardProtocolRegistration bool true
RA2.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA2.at.forwardServiceRegistration bool true
RA2.at.forwardProtocolRegistration bool true
RA2.bgp.interfaceTableModule string

The path to the InterfaceTable module
RA2.bgp.routingTableModule string
RA2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RA3.status.initialStatus string "UP"

TODO @signal, @statistic
RA3.pcapRecorder.verbose bool true

whether to log packets on the module output
RA3.pcapRecorder.pcapFile string ""

the PCAP file to be written
RA3.pcapRecorder.fileFormat string "pcapng"
RA3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RA3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RA3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RA3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RA3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RA3.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RA3.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RA3.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RA3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RA3.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RA3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RA3.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA3.cb.forwardServiceRegistration bool true
RA3.cb.forwardProtocolRegistration bool true
RA3.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA3.bl.forwardServiceRegistration bool true
RA3.bl.forwardProtocolRegistration bool true
RA3.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA3.li.forwardServiceRegistration bool true
RA3.li.forwardProtocolRegistration bool true
RA3.eth.bitrate double
RA3.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA3.nl.forwardServiceRegistration bool true
RA3.nl.forwardProtocolRegistration bool true
RA3.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA3.tn.forwardServiceRegistration bool true
RA3.tn.forwardProtocolRegistration bool true
RA3.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RA3.at.forwardServiceRegistration bool true
RA3.at.forwardProtocolRegistration bool true
RA3.bgp.interfaceTableModule string

The path to the InterfaceTable module
RA3.bgp.routingTableModule string
RA3.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RB1.status.initialStatus string "UP"

TODO @signal, @statistic
RB1.pcapRecorder.verbose bool true

whether to log packets on the module output
RB1.pcapRecorder.pcapFile string ""

the PCAP file to be written
RB1.pcapRecorder.fileFormat string "pcapng"
RB1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RB1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RB1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RB1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RB1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RB1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RB1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RB1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RB1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RB1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RB1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RB1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.cb.forwardServiceRegistration bool true
RB1.cb.forwardProtocolRegistration bool true
RB1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.bl.forwardServiceRegistration bool true
RB1.bl.forwardProtocolRegistration bool true
RB1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.li.forwardServiceRegistration bool true
RB1.li.forwardProtocolRegistration bool true
RB1.eth.bitrate double
RB1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.nl.forwardServiceRegistration bool true
RB1.nl.forwardProtocolRegistration bool true
RB1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.tn.forwardServiceRegistration bool true
RB1.tn.forwardProtocolRegistration bool true
RB1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RB1.at.forwardServiceRegistration bool true
RB1.at.forwardProtocolRegistration bool true
RB1.bgp.interfaceTableModule string

The path to the InterfaceTable module
RB1.bgp.routingTableModule string
RB1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RC1.status.initialStatus string "UP"

TODO @signal, @statistic
RC1.pcapRecorder.verbose bool true

whether to log packets on the module output
RC1.pcapRecorder.pcapFile string ""

the PCAP file to be written
RC1.pcapRecorder.fileFormat string "pcapng"
RC1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RC1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RC1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RC1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RC1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RC1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RC1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RC1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RC1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RC1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RC1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RC1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC1.cb.forwardServiceRegistration bool true
RC1.cb.forwardProtocolRegistration bool true
RC1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC1.bl.forwardServiceRegistration bool true
RC1.bl.forwardProtocolRegistration bool true
RC1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC1.li.forwardServiceRegistration bool true
RC1.li.forwardProtocolRegistration bool true
RC1.eth.bitrate double
RC1.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC1.nl.forwardServiceRegistration bool true
RC1.nl.forwardProtocolRegistration bool true
RC1.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC1.tn.forwardServiceRegistration bool true
RC1.tn.forwardProtocolRegistration bool true
RC1.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC1.at.forwardServiceRegistration bool true
RC1.at.forwardProtocolRegistration bool true
RC1.bgp.interfaceTableModule string

The path to the InterfaceTable module
RC1.bgp.routingTableModule string
RC1.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
RC2.status.initialStatus string "UP"

TODO @signal, @statistic
RC2.pcapRecorder.verbose bool true

whether to log packets on the module output
RC2.pcapRecorder.pcapFile string ""

the PCAP file to be written
RC2.pcapRecorder.fileFormat string "pcapng"
RC2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
RC2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
RC2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
RC2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
RC2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
RC2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
RC2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
RC2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
RC2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
RC2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
RC2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
RC2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC2.cb.forwardServiceRegistration bool true
RC2.cb.forwardProtocolRegistration bool true
RC2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC2.bl.forwardServiceRegistration bool true
RC2.bl.forwardProtocolRegistration bool true
RC2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC2.li.forwardServiceRegistration bool true
RC2.li.forwardProtocolRegistration bool true
RC2.eth.bitrate double
RC2.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC2.nl.forwardServiceRegistration bool true
RC2.nl.forwardProtocolRegistration bool true
RC2.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC2.tn.forwardServiceRegistration bool true
RC2.tn.forwardProtocolRegistration bool true
RC2.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
RC2.at.forwardServiceRegistration bool true
RC2.at.forwardProtocolRegistration bool true
RC2.bgp.interfaceTableModule string

The path to the InterfaceTable module
RC2.bgp.routingTableModule string
RC2.bgp.ospfRoutingModule string parent.hasOspf ? "^.ospf" : ""
PA3.macTable.agingTime double
PA3.macTable.forwardingTableFile string
PA3.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PA3.l2NodeConfigurator.interfaceTableModule string
PA3.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PA3.status.initialStatus string "UP"

TODO @signal, @statistic
PA3.pcapRecorder.verbose bool true

whether to log packets on the module output
PA3.pcapRecorder.pcapFile string ""

the PCAP file to be written
PA3.pcapRecorder.fileFormat string "pcapng"
PA3.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PA3.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PA3.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PA3.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PA3.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PA3.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PA3.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PA3.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PA3.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PA3.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PA3.stp.helloTime double
PA3.stp.forwardDelay double
PA3.stp.maxAge double
PA3.stp.bridgePriority int
PA3.stp.visualize bool
PA3.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA3.sc.forwardServiceRegistration bool true
PA3.sc.forwardProtocolRegistration bool true
PA3.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA3.cb.forwardServiceRegistration bool true
PA3.cb.forwardProtocolRegistration bool true
PA3.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA3.bl.forwardServiceRegistration bool true
PA3.bl.forwardProtocolRegistration bool true
PA3.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA3.li.forwardServiceRegistration bool true
PA3.li.forwardProtocolRegistration bool true
PA3.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PA3.cutthrough.forwardServiceRegistration bool true
PA3.cutthrough.forwardProtocolRegistration bool true
PA3.eth.bitrate double
PB1.macTable.agingTime double
PB1.macTable.forwardingTableFile string
PB1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PB1.l2NodeConfigurator.interfaceTableModule string
PB1.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PB1.status.initialStatus string "UP"

TODO @signal, @statistic
PB1.pcapRecorder.verbose bool true

whether to log packets on the module output
PB1.pcapRecorder.pcapFile string ""

the PCAP file to be written
PB1.pcapRecorder.fileFormat string "pcapng"
PB1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PB1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PB1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PB1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PB1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PB1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PB1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PB1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PB1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PB1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PB1.stp.helloTime double
PB1.stp.forwardDelay double
PB1.stp.maxAge double
PB1.stp.bridgePriority int
PB1.stp.visualize bool
PB1.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.sc.forwardServiceRegistration bool true
PB1.sc.forwardProtocolRegistration bool true
PB1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.cb.forwardServiceRegistration bool true
PB1.cb.forwardProtocolRegistration bool true
PB1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.bl.forwardServiceRegistration bool true
PB1.bl.forwardProtocolRegistration bool true
PB1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.li.forwardServiceRegistration bool true
PB1.li.forwardProtocolRegistration bool true
PB1.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PB1.cutthrough.forwardServiceRegistration bool true
PB1.cutthrough.forwardProtocolRegistration bool true
PB1.eth.bitrate double
PC1.macTable.agingTime double
PC1.macTable.forwardingTableFile string
PC1.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PC1.l2NodeConfigurator.interfaceTableModule string
PC1.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PC1.status.initialStatus string "UP"

TODO @signal, @statistic
PC1.pcapRecorder.verbose bool true

whether to log packets on the module output
PC1.pcapRecorder.pcapFile string ""

the PCAP file to be written
PC1.pcapRecorder.fileFormat string "pcapng"
PC1.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PC1.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PC1.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PC1.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PC1.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PC1.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PC1.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PC1.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PC1.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PC1.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PC1.stp.helloTime double
PC1.stp.forwardDelay double
PC1.stp.maxAge double
PC1.stp.bridgePriority int
PC1.stp.visualize bool
PC1.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC1.sc.forwardServiceRegistration bool true
PC1.sc.forwardProtocolRegistration bool true
PC1.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC1.cb.forwardServiceRegistration bool true
PC1.cb.forwardProtocolRegistration bool true
PC1.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC1.bl.forwardServiceRegistration bool true
PC1.bl.forwardProtocolRegistration bool true
PC1.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC1.li.forwardServiceRegistration bool true
PC1.li.forwardProtocolRegistration bool true
PC1.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC1.cutthrough.forwardServiceRegistration bool true
PC1.cutthrough.forwardProtocolRegistration bool true
PC1.eth.bitrate double
PC2.macTable.agingTime double
PC2.macTable.forwardingTableFile string
PC2.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
PC2.l2NodeConfigurator.interfaceTableModule string
PC2.l2NodeConfigurator.l2ConfiguratorModule string "l2NetworkConfigurator"

the absolute path to the ~L2NetworkConfigurator; use "" if there is no configurator
PC2.status.initialStatus string "UP"

TODO @signal, @statistic
PC2.pcapRecorder.verbose bool true

whether to log packets on the module output
PC2.pcapRecorder.pcapFile string ""

the PCAP file to be written
PC2.pcapRecorder.fileFormat string "pcapng"
PC2.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
PC2.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
PC2.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
PC2.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
PC2.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
PC2.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
PC2.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
PC2.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
PC2.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
PC2.pcapRecorder.displayStringTextFormat string "rec: %n pks"
PC2.stp.helloTime double
PC2.stp.forwardDelay double
PC2.stp.maxAge double
PC2.stp.bridgePriority int
PC2.stp.visualize bool
PC2.sc.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC2.sc.forwardServiceRegistration bool true
PC2.sc.forwardProtocolRegistration bool true
PC2.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC2.cb.forwardServiceRegistration bool true
PC2.cb.forwardProtocolRegistration bool true
PC2.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC2.bl.forwardServiceRegistration bool true
PC2.bl.forwardProtocolRegistration bool true
PC2.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC2.li.forwardServiceRegistration bool true
PC2.li.forwardProtocolRegistration bool true
PC2.cutthrough.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
PC2.cutthrough.forwardServiceRegistration bool true
PC2.cutthrough.forwardProtocolRegistration bool true
PC2.eth.bitrate double
HA31.status.initialStatus string "UP"

TODO @signal, @statistic
HA31.pcapRecorder.verbose bool true

whether to log packets on the module output
HA31.pcapRecorder.pcapFile string ""

the PCAP file to be written
HA31.pcapRecorder.fileFormat string "pcapng"
HA31.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HA31.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HA31.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HA31.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HA31.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HA31.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HA31.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HA31.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HA31.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HA31.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HA31.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HA31.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA31.cb.forwardServiceRegistration bool true
HA31.cb.forwardProtocolRegistration bool true
HA31.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA31.bl.forwardServiceRegistration bool true
HA31.bl.forwardProtocolRegistration bool true
HA31.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA31.li.forwardServiceRegistration bool true
HA31.li.forwardProtocolRegistration bool true
HA31.eth.bitrate double
HA31.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA31.nl.forwardServiceRegistration bool true
HA31.nl.forwardProtocolRegistration bool true
HA31.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA31.tn.forwardServiceRegistration bool true
HA31.tn.forwardProtocolRegistration bool true
HA31.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA31.at.forwardServiceRegistration bool true
HA31.at.forwardProtocolRegistration bool true
HA32.status.initialStatus string "UP"

TODO @signal, @statistic
HA32.pcapRecorder.verbose bool true

whether to log packets on the module output
HA32.pcapRecorder.pcapFile string ""

the PCAP file to be written
HA32.pcapRecorder.fileFormat string "pcapng"
HA32.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HA32.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HA32.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HA32.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HA32.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HA32.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HA32.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HA32.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HA32.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HA32.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HA32.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HA32.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA32.cb.forwardServiceRegistration bool true
HA32.cb.forwardProtocolRegistration bool true
HA32.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA32.bl.forwardServiceRegistration bool true
HA32.bl.forwardProtocolRegistration bool true
HA32.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA32.li.forwardServiceRegistration bool true
HA32.li.forwardProtocolRegistration bool true
HA32.eth.bitrate double
HA32.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA32.nl.forwardServiceRegistration bool true
HA32.nl.forwardProtocolRegistration bool true
HA32.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA32.tn.forwardServiceRegistration bool true
HA32.tn.forwardProtocolRegistration bool true
HA32.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HA32.at.forwardServiceRegistration bool true
HA32.at.forwardProtocolRegistration bool true
HB11.status.initialStatus string "UP"

TODO @signal, @statistic
HB11.pcapRecorder.verbose bool true

whether to log packets on the module output
HB11.pcapRecorder.pcapFile string ""

the PCAP file to be written
HB11.pcapRecorder.fileFormat string "pcapng"
HB11.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HB11.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HB11.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HB11.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HB11.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HB11.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HB11.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HB11.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HB11.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HB11.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HB11.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HB11.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.cb.forwardServiceRegistration bool true
HB11.cb.forwardProtocolRegistration bool true
HB11.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.bl.forwardServiceRegistration bool true
HB11.bl.forwardProtocolRegistration bool true
HB11.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.li.forwardServiceRegistration bool true
HB11.li.forwardProtocolRegistration bool true
HB11.eth.bitrate double
HB11.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.nl.forwardServiceRegistration bool true
HB11.nl.forwardProtocolRegistration bool true
HB11.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.tn.forwardServiceRegistration bool true
HB11.tn.forwardProtocolRegistration bool true
HB11.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB11.at.forwardServiceRegistration bool true
HB11.at.forwardProtocolRegistration bool true
HB12.status.initialStatus string "UP"

TODO @signal, @statistic
HB12.pcapRecorder.verbose bool true

whether to log packets on the module output
HB12.pcapRecorder.pcapFile string ""

the PCAP file to be written
HB12.pcapRecorder.fileFormat string "pcapng"
HB12.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HB12.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HB12.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HB12.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HB12.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HB12.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HB12.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HB12.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HB12.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HB12.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HB12.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HB12.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.cb.forwardServiceRegistration bool true
HB12.cb.forwardProtocolRegistration bool true
HB12.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.bl.forwardServiceRegistration bool true
HB12.bl.forwardProtocolRegistration bool true
HB12.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.li.forwardServiceRegistration bool true
HB12.li.forwardProtocolRegistration bool true
HB12.eth.bitrate double
HB12.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.nl.forwardServiceRegistration bool true
HB12.nl.forwardProtocolRegistration bool true
HB12.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.tn.forwardServiceRegistration bool true
HB12.tn.forwardProtocolRegistration bool true
HB12.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HB12.at.forwardServiceRegistration bool true
HB12.at.forwardProtocolRegistration bool true
HC11.status.initialStatus string "UP"

TODO @signal, @statistic
HC11.pcapRecorder.verbose bool true

whether to log packets on the module output
HC11.pcapRecorder.pcapFile string ""

the PCAP file to be written
HC11.pcapRecorder.fileFormat string "pcapng"
HC11.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HC11.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HC11.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HC11.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HC11.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HC11.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HC11.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HC11.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HC11.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HC11.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HC11.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HC11.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC11.cb.forwardServiceRegistration bool true
HC11.cb.forwardProtocolRegistration bool true
HC11.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC11.bl.forwardServiceRegistration bool true
HC11.bl.forwardProtocolRegistration bool true
HC11.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC11.li.forwardServiceRegistration bool true
HC11.li.forwardProtocolRegistration bool true
HC11.eth.bitrate double
HC11.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC11.nl.forwardServiceRegistration bool true
HC11.nl.forwardProtocolRegistration bool true
HC11.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC11.tn.forwardServiceRegistration bool true
HC11.tn.forwardProtocolRegistration bool true
HC11.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC11.at.forwardServiceRegistration bool true
HC11.at.forwardProtocolRegistration bool true
HC12.status.initialStatus string "UP"

TODO @signal, @statistic
HC12.pcapRecorder.verbose bool true

whether to log packets on the module output
HC12.pcapRecorder.pcapFile string ""

the PCAP file to be written
HC12.pcapRecorder.fileFormat string "pcapng"
HC12.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HC12.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HC12.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HC12.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HC12.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HC12.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HC12.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HC12.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HC12.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HC12.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HC12.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HC12.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC12.cb.forwardServiceRegistration bool true
HC12.cb.forwardProtocolRegistration bool true
HC12.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC12.bl.forwardServiceRegistration bool true
HC12.bl.forwardProtocolRegistration bool true
HC12.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC12.li.forwardServiceRegistration bool true
HC12.li.forwardProtocolRegistration bool true
HC12.eth.bitrate double
HC12.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC12.nl.forwardServiceRegistration bool true
HC12.nl.forwardProtocolRegistration bool true
HC12.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC12.tn.forwardServiceRegistration bool true
HC12.tn.forwardProtocolRegistration bool true
HC12.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC12.at.forwardServiceRegistration bool true
HC12.at.forwardProtocolRegistration bool true
HC21.status.initialStatus string "UP"

TODO @signal, @statistic
HC21.pcapRecorder.verbose bool true

whether to log packets on the module output
HC21.pcapRecorder.pcapFile string ""

the PCAP file to be written
HC21.pcapRecorder.fileFormat string "pcapng"
HC21.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HC21.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HC21.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HC21.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HC21.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HC21.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HC21.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HC21.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HC21.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HC21.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HC21.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HC21.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC21.cb.forwardServiceRegistration bool true
HC21.cb.forwardProtocolRegistration bool true
HC21.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC21.bl.forwardServiceRegistration bool true
HC21.bl.forwardProtocolRegistration bool true
HC21.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC21.li.forwardServiceRegistration bool true
HC21.li.forwardProtocolRegistration bool true
HC21.eth.bitrate double
HC21.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC21.nl.forwardServiceRegistration bool true
HC21.nl.forwardProtocolRegistration bool true
HC21.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC21.tn.forwardServiceRegistration bool true
HC21.tn.forwardProtocolRegistration bool true
HC21.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC21.at.forwardServiceRegistration bool true
HC21.at.forwardProtocolRegistration bool true
HC22.status.initialStatus string "UP"

TODO @signal, @statistic
HC22.pcapRecorder.verbose bool true

whether to log packets on the module output
HC22.pcapRecorder.pcapFile string ""

the PCAP file to be written
HC22.pcapRecorder.fileFormat string "pcapng"
HC22.pcapRecorder.snaplen int 65535

maximum number of bytes to record per packet
HC22.pcapRecorder.dumpBadFrames bool true

enable dump of frames with hasBitError
HC22.pcapRecorder.moduleNamePatterns string "wlan[*] eth[*] ppp[*]"

space-separated list of sibling module names to listen on
HC22.pcapRecorder.sendingSignalNames string "packetSentToLower"

space-separated list of outbound packet signals to subscribe to
HC22.pcapRecorder.receivingSignalNames string "packetReceivedFromLower"

space-separated list of inbound packet signals to subscribe to
HC22.pcapRecorder.dumpProtocols string "ethernetmac ppp ieee80211mac"

space-separated list of protocol names as defined in the Protocol class
HC22.pcapRecorder.packetFilter object "*"

which packets are considered, matches all packets by default
HC22.pcapRecorder.helpers string ""

usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype currently available: "inet::AckingMacToEthernetPcapRecorderHelper"
HC22.pcapRecorder.alwaysFlush bool false

flush the pcapFile after each write to ensure that all packets are captured in case of a crash
HC22.pcapRecorder.displayStringTextFormat string "rec: %n pks"
HC22.interfaceTable.displayAddresses bool false

whether to display IP addresses on links
HC22.cb.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC22.cb.forwardServiceRegistration bool true
HC22.cb.forwardProtocolRegistration bool true
HC22.bl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC22.bl.forwardServiceRegistration bool true
HC22.bl.forwardProtocolRegistration bool true
HC22.li.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC22.li.forwardServiceRegistration bool true
HC22.li.forwardProtocolRegistration bool true
HC22.eth.bitrate double
HC22.nl.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC22.nl.forwardServiceRegistration bool true
HC22.nl.forwardProtocolRegistration bool true
HC22.tn.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC22.tn.forwardServiceRegistration bool true
HC22.tn.forwardProtocolRegistration bool true
HC22.at.displayStringTextFormat string "processed %p pk (%l)"

determines the text that is written on top of the submodule
HC22.at.forwardServiceRegistration bool true
HC22.at.forwardProtocolRegistration bool true

Source code

network BgpNetwork
{
    types:
        channel LINK_100 extends ThruputMeteringChannel
        {
            parameters:
                delay = 50us;
                datarate = 100Mbps;
                displayAsTooltip = true;
                thruputDisplayFormat = "#N";
        }
    submodules:
        visualizer: IntegratedCanvasVisualizer {
            parameters:
                @display("p=100,100;is=s");
        }
        configurator: Ipv4NetworkConfigurator {
            parameters:
                @display("p=100,200;is=s");
                config = xmldoc("IPv4Config.xml");
                addStaticRoutes = false;
                addDefaultRoutes = false;
                addSubnetRoutes = false;
        }
        A1: BgpRouter {
            parameters:
                @display("p=700,230");
            gates:
                pppg[2];
        }
        A2: BgpRouter {
            parameters:
                @display("p=850,230");
            gates:
                pppg[2];
        }
        B: BgpRouter {
            parameters:
                @display("p=700,130");
            gates:
                pppg[2];
        }
        C: BgpRouter {
            parameters:
                @display("p=850,130");
            gates:
                pppg[3];
        }
        RA1: OspfRouter {
            parameters:
                @display("p=700,330;i=device/router");
            gates:
                pppg[3];
        }
        RA2: OspfRouter {
            parameters:
                @display("p=850,330;i=device/router");
            gates:
                pppg[3];
        }
        RA3: OspfRouter {
            parameters:
                @display("p=775,430;i=device/router");
            gates:
                pppg[2];
                ethg[1];
        }
        RB1: OspfRouter {
            parameters:
                @display("p=550,130;i=device/router");
            gates:
                pppg[1];
                ethg[1];
        }
        RC1: OspfRouter {
            parameters:
                @display("p=1000,130;i=device/router");
            gates:
                pppg[2];
                ethg[1];
        }
        RC2: OspfRouter {
            parameters:
                @display("p=1000,330;i=device/router");
            gates:
                pppg[2];
                ethg[1];
        }
        PA3: EthernetSwitch {
            parameters:
                @display("p=775,530;i=device/switch");
            gates:
                ethg[3];
        }
        PB1: EthernetSwitch {
            parameters:
                @display("p=400,130;i=device/switch");
            gates:
                ethg[3];
        }
        PC1: EthernetSwitch {
            parameters:
                @display("p=1150,130;i=device/switch");
            gates:
                ethg[3];
        }
        PC2: EthernetSwitch {
            parameters:
                @display("p=1150,330;i=device/switch");
            gates:
                ethg[3];
        }
        HA31: StandardHost {
            parameters:
                @display("p=700,630;i=device/pc");
            gates:
                ethg[1];
        }
        HA32: StandardHost {
            parameters:
                @display("p=850,630;i=device/pc");
            gates:
                ethg[1];
        }
        HB11: StandardHost {
            parameters:
                @display("p=250,80;i=device/pc");
            gates:
                ethg[1];
        }
        HB12: StandardHost {
            parameters:
                @display("p=250,180;i=device/pc");
            gates:
                ethg[1];
        }
        HC11: StandardHost {
            parameters:
                @display("p=1300,80;i=device/pc");
            gates:
                ethg[1];
        }
        HC12: StandardHost {
            parameters:
                @display("p=1300,180;i=device/pc");
            gates:
                ethg[1];
        }
        HC21: StandardHost {
            parameters:
                @display("p=1300,280;i=device/pc");
            gates:
                ethg[1];
        }
        HC22: StandardHost {
            parameters:
                @display("p=1300,380;i=device/pc");
            gates:
                ethg[1];
        }
    connections:
        //LAN RA3
        HA31.ethg[0] <--> LINK_100 <--> PA3.ethg[0];
        HA32.ethg[0] <--> LINK_100 <--> PA3.ethg[1];
        PA3.ethg[2] <--> LINK_100 <--> RA3.ethg[0];

        //LAN RB1
        HB11.ethg[0] <--> LINK_100 <--> PB1.ethg[0];
        HB12.ethg[0] <--> LINK_100 <--> PB1.ethg[1];
        PB1.ethg[2] <--> LINK_100 <--> RB1.ethg[0];

        //LAN C1 et C2
        HC11.ethg[0] <--> LINK_100 <--> PC1.ethg[0];
        HC12.ethg[0] <--> LINK_100 <--> PC1.ethg[1];
        HC21.ethg[0] <--> LINK_100 <--> PC2.ethg[0];
        HC22.ethg[0] <--> LINK_100 <--> PC2.ethg[1];
        PC1.ethg[2] <--> LINK_100 <--> RC1.ethg[0];
        PC2.ethg[2] <--> LINK_100 <--> RC2.ethg[0];

        //OSPF A
        RA1.pppg[2] <--> LINK_100 <--> RA3.pppg[0];
        RA2.pppg[2] <--> LINK_100 <--> RA3.pppg[1];
        RA1.pppg[1] <--> LINK_100 <--> RA2.pppg[1];
        RA1.pppg[0] <--> LINK_100 <--> A1.pppg[1];
        RA2.pppg[0] <--> LINK_100 <--> A2.pppg[1];

        //OSPF B
        RB1.pppg[0] <--> LINK_100 <--> B.pppg[1];

        //OSPF C
        RC1.pppg[1] <--> LINK_100 <--> RC2.pppg[1];
        RC1.pppg[0] <--> LINK_100 <--> C.pppg[1];
        RC2.pppg[0] <--> LINK_100 <--> C.pppg[2];

        //BGP
        A1.pppg[0] <--> LINK_100 <--> B.pppg[0];
        A2.pppg[0] <--> LINK_100 <--> C.pppg[0];
}
File: examples/bgpv4/Bgp2RoutersInAS/Network.ned

This documentation is released under the Creative Commons license